Got it.. I'm good

 

my dongle is not working and will have to be sent into cobb to get it warrantied. I did manage to still get it loaded with someone else's dongle. I test drove it with stage 2 and it was fine, don't remember seeing the a/f myself under load, but idle was 14 steady.

 

This thing scared the shiet outta me. I Saved my factory setting b4 upgrading to stage 2, ran with it for 1 week and uninstalled it back to Factory setting. The Uninstallation was successfull but my G wouldn't start, Battery was perfect, all I heard was this grinding, shaking from the either the engine or the transmission and the smell of Gasoline but somehow it wouldn't start, then I had tried the other route by putting stage 1 back in, now the car has no issue at all. Has anybody ever encountered this problem???

 

nope ... never... i have loaded and unloaded mine about 10 times...

 

did you load the the anti-theft map by accident? I think that's what it's suppose to do if you load that map. Why are you going back to your stock map if you have the mods for stage 2?

 

The v1.03 maps I mentioned are for a different car.

 

can someone help me get the 93 AT maps. this is all crazy for me.

 

Nah it was no accident, I loaded stage 2(Successful) and unintalled to check how my G was doing but it just wouldn't let my G cranked up. I'm running stage 1 now and don't know if it's gonna happen again if I uninstall Accessport outta my G.

 

The current preloaded Stage 1 & 2 maps are v1.00 and are for 91-93 octane.. there are not other maps to my knowledge on COBBs site.

 

My sole engine mod is the Stillen catback exhaust and now the Cobb AccessPort. That being said, Stage 2 is the preloaded map for me correct? Also, if I wanted to spring for a custom tune, can it be done via the datalogging on the Cobb or do I need to go back to the dyno?

 

Is anyone having a problem with 0-60 and 1/4 mile testing? Mine is not working right... it turns a 1/4 mile into like 4 miles... I ran a 1/4 mile today in like 3 minutes... same with the 0-60 ... I did it today and shut down at 70mph and was still 13% finsihed with the test... Ima try to update it to see if it works but just wanted to ask if anyone had any problems...

 

I didnt have any problems before i flashed the AP with the latest firmware with the datalogging, before that worked fine, now i havent tried it.

 

sounds like you need a witch doctor and some frog legs, your AP is possesed!

 

Max,

I had a similar issue the other day...I didn't have time to re-do it though. When I get some time this week, I'll see if I can't run some tests...

 

sweet...let me know....