Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Cobb test mule

Old Oct 6, 2008 | 10:34 AM
  #61  
KahnQuistador's Avatar
KahnQuistador
Registered User
 
Joined: Dec 2007
Posts: 181
Likes: 0
Hmmm. I seem to recall that EVERYBODY was going orgasmic over intakes not that long ago.

Where did all those gains go?

Maybe we'll see some test results for the Stillen intakes so I can be embarrassed, too.

Will I have to replace all my mods with decals?
Reply
Old Oct 6, 2008 | 11:45 AM
  #62  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
Originally Posted by GiGGaplease
i think you are the first.

dont tell me you guys expected a lot of gains from an intake..
Seems alot of people on here believe everything that a company tells them. People even go as far as to quote their websites.. Weird !!
Reply
Old Oct 6, 2008 | 12:23 PM
  #63  
KahnQuistador's Avatar
KahnQuistador
Registered User
 
Joined: Dec 2007
Posts: 181
Likes: 0
Originally Posted by neverbonestock
Seems alot of people on here believe everything that a company tells them. People even go as far as to quote their websites.. Weird !!
Any chance of a Stillen comparison?
Reply
Old Oct 6, 2008 | 07:28 PM
  #64  
bboysteele's Avatar
bboysteele
Premier Member
 
Joined: Jul 2007
Posts: 3,346
Likes: 3
From: Colorado Springs, CO
So neverbonestock, why did you take down your dyno runs?
Reply
Old Oct 6, 2008 | 08:36 PM
  #65  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
I was posting pics of my volks and had to delete some pics .. Im putting them back up .
Reply
Old Oct 6, 2008 | 10:53 PM
  #66  
KahnQuistador's Avatar
KahnQuistador
Registered User
 
Joined: Dec 2007
Posts: 181
Likes: 0
Originally Posted by KahnQuistador
Any chance of a Stillen comparison?
Bump on this one.

I'm talking to a shop about cams, head work, stroker kit and a charger. Any input on the Stillen intakes would help.
Reply
Old Oct 6, 2008 | 10:56 PM
  #67  
bboysteele's Avatar
bboysteele
Premier Member
 
Joined: Jul 2007
Posts: 3,346
Likes: 3
From: Colorado Springs, CO
Cool, I am going to send them to my tuner. Can you post a detailed plan that your tuner ran through when doing your dynos? Like when ECU resets were done and time inbetween runs? Was the JWT and stock runs done the same day? I still have major doubts about the stock run just because of the 17TQ increase there is over the JWT and that is across the whole power band. Something just doesn't add up. I am going to have my tuner do the same to see what mine puts down since we have the same mods. He is also a Cobb tuner as well so I will get him to talk to Cobb as well.
Reply
Old Oct 7, 2008 | 01:32 AM
  #68  
Hawaiian72099's Avatar
Hawaiian72099
Registered User
 
Joined: Jun 2008
Posts: 315
Likes: 1
From: Ewa Beach, Hawaii and Guam
Originally Posted by bboysteele
Cool, I am going to send them to my tuner. Can you post a detailed plan that your tuner ran through when doing your dynos? Like when ECU resets were done and time inbetween runs? Was the JWT and stock runs done the same day? I still have major doubts about the stock run just because of the 17TQ increase there is over the JWT and that is across the whole power band. Something just doesn't add up. I am going to have my tuner do the same to see what mine puts down since we have the same mods. He is also a Cobb tuner as well so I will get him to talk to Cobb as well.
Hopefully you guys figure something out so I don't have to throw my JWTs in the trash.Thanks guys!
Reply
Old Oct 7, 2008 | 01:59 AM
  #69  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
Originally Posted by bboysteele
Cool, I am going to send them to my tuner. Can you post a detailed plan that your tuner ran through when doing your dynos? Like when ECU resets were done and time inbetween runs? Was the JWT and stock runs done the same day? I still have major doubts about the stock run just because of the 17TQ increase there is over the JWT and that is across the whole power band. Something just doesn't add up. I am going to have my tuner do the same to see what mine puts down since we have the same mods. He is also a Cobb tuner as well so I will get him to talk to Cobb as well.
Im dropping the car off again tomorrow and he will have it for 2 days to tune. I will try to get the info you are requesting.. Wait a minute ... if he is a Cobb tuner have him call Tim at surgeline and get info ...
Reply
Old Oct 7, 2008 | 02:08 AM
  #70  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
pics

Pics ..

Last edited by NeverBoneStock; Nov 11, 2008 at 11:15 PM.
Reply
Old Oct 7, 2008 | 02:20 AM
  #71  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
Also going to dyno K&N drop in filters for schits and giggles..
Reply
Old Oct 7, 2008 | 02:38 AM
  #72  
herrjr's Avatar
herrjr
Registered User
iTrader: (1)
 
Joined: Mar 2008
Posts: 171
Likes: 0
From: Suburbia, CA
Thanks for the info. I understand how you feel about what people are posting regarding your results, since this is somewhat similar to what I experienced when I posted my Injen dynos a while back. I'm just glad that you're getting all this testing done at no-dollar-cost to yourself, cause it sucked when I had to pay for all my own testing myself, and have douches critique me about my results lol. I appreciate you going through all this trouble, and just know that 99% of the people on this board are too cheap or unwilling to get their own dynos done, so they'd rather piggyback on other people's experiences. And if they hear about something that they'd rather not hear, then it's somehow your fault and that you did something wrong. Good luck, and thanks again.
Reply
Old Oct 7, 2008 | 02:52 AM
  #73  
NeverBoneStock's Avatar
NeverBoneStock
Thread Starter
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
Originally Posted by herrjr
Thanks for the info. I understand how you feel about what people are posting regarding your results, since this is somewhat similar to what I experienced when I posted my Injen dynos a while back. I'm just glad that you're getting all this testing done at no-dollar-cost to yourself, cause it sucked when I had to pay for all my own testing myself, and have douches critique me about my results lol. I appreciate you going through all this trouble, and just know that 99% of the people on this board are too cheap or unwilling to get their own dynos done, so they'd rather piggyback on other people's experiences. And if they hear about something that they'd rather not hear, then it's somehow your fault and that you did something wrong. Good luck, and thanks again.
I agree... It feels like at times im kicking these peoples in the ***** . Im just giving info as I get it .. Thanx again !!
Reply
Old Oct 7, 2008 | 03:18 AM
  #74  
eticket's Avatar
eticket
Registered User
 
Joined: Oct 2008
Posts: 22
Likes: 0
From: Orange County, CA
Originally Posted by herrjr
Thanks for the info. I understand how you feel about what people are posting regarding your results, since this is somewhat similar to what I experienced when I posted my Injen dynos a while back. I'm just glad that you're getting all this testing done at no-dollar-cost to yourself, cause it sucked when I had to pay for all my own testing myself, and have douches critique me about my results lol. I appreciate you going through all this trouble, and just know that 99% of the people on this board are too cheap or unwilling to get their own dynos done, so they'd rather piggyback on other people's experiences. And if they hear about something that they'd rather not hear, then it's somehow your fault and that you did something wrong. Good luck, and thanks again.
..DITTO,!!!
thanks for your info and enthusiasm, NBS....
Reply
Old Oct 8, 2008 | 10:42 AM
  #75  
sredish's Avatar
sredish
Registered User
 
Joined: Jul 2008
Posts: 119
Likes: 0
From: Chandler AZ
can't wait to hear how it turns out!!!
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 08:00 AM.