Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

Cobb access port

Thread Tools
 
Search this Thread
 
Old Aug 26, 2008 | 10:07 AM
  #151  
sredish's Avatar
sredish
Registered User
 
Joined: Jul 2008
Posts: 119
Likes: 0
From: Chandler AZ
AZg37, these two quotes should answer your questions.

Originally Posted by peterbanks
Intakes, High Flow Cats, and Exhausts definitely seem to be the top mods for the G37 so far. I hope that the AccessPORT will compliment these as well.
Originally Posted by Joe@Cobb
yes that is exactly what we have on our G37, and is what our "Stage 2" is targeting.

Originally Posted by bboysteele
So someone from COBB, do you do custom tunes for customers that drive to your location or are we limited to what you release? Since the custom map software is going to take another year or two at least, to allow customers to get the most out of their car and aftermarket mods. The COBB certified shop I go to will not be able to do anything until this software is released from what I have heard and personally I don't think I will be satisfied with a map that gives me 2-3% increase in HP/TQ when other G37 people are getting a 25HP/20TQ+ (that is close to 9-10%)increase from a reflash designed for their car and mods. Plus there was increase in power across the entire RPM band to include the lower level. Let us know if getting a custom map at your shop is possible and the cost for something like this.
Originally Posted by Joe@Cobb
Yes when we do our initial release there will be a lot of you who will not see the power gains that you could with a custom tune.

Our tuner work very hard to keep our customers happy. If you are not satisfied with the tune on the AccessPORT all you need to do is get a hold of a DashHawk or some other sort of data logger and data log your car. Then working with one of our tuners they will be able to modify the map on your car to make a custom tune. It's the best way we can custom tune with out having to bring your vehicle to your shop.

Our tuners are more then happy to custom tune a map for you, all you need to do is provide them with data logs.

Joe

Last edited by sredish; Aug 26, 2008 at 10:10 AM.
Reply
Old Aug 26, 2008 | 10:17 AM
  #152  
sredish's Avatar
sredish
Registered User
 
Joined: Jul 2008
Posts: 119
Likes: 0
From: Chandler AZ
Originally Posted by Buddy Revell

wonder why they're not over here and on the G35 site trying to get some of us to get involved as well, seems they're favoring the damn Z.
Reply
Old Aug 26, 2008 | 11:46 AM
  #153  
oct2274's Avatar
oct2274
Thread Starter
Registered User
 
Joined: Jan 2008
Posts: 207
Likes: 0
From: Phoenix, AZ and San Diego
i'm just going to take a guess at this and say that it makes more sense to pay more attention to the 350z when there are probably 3-4 times the amount of people that own Z's that will buy the AP vs the g37.
Reply
Old Aug 26, 2008 | 11:49 AM
  #154  
bboysteele's Avatar
bboysteele
Premier Member
 
Joined: Jul 2007
Posts: 3,346
Likes: 3
From: Colorado Springs, CO
There is also this which someone posted on the Cobb site:

http://forums.cobbtuning.com/forums/...ad.php?t=41434

If this is true then a Cobb certified shop should be able to manipulate the Stage 1 & 2 maps to a customers liking.
Reply
Old Aug 26, 2008 | 02:49 PM
  #155  
sredish's Avatar
sredish
Registered User
 
Joined: Jul 2008
Posts: 119
Likes: 0
From: Chandler AZ
Originally Posted by bboysteele
There is also this which someone posted on the Cobb site:

http://forums.cobbtuning.com/forums/...ad.php?t=41434

If this is true then a Cobb certified shop should be able to manipulate the Stage 1 & 2 maps to a customers liking.
But that's a subaru based forum section and I'm guessing, isn't going to apply to us Infiniti doods.
Reply
Old Aug 27, 2008 | 04:17 PM
  #156  
randomdj's Avatar
randomdj
Registered User
 
Joined: Jun 2004
Posts: 4
Likes: 0
From: Boston
first off... the fact that someone is getting emails from Trey is a good thing.... Trey is an incredibly busy man... i know that they are working diligently on releasing the AP for all the g's...

streettuner is typically released after protuner software is... it's meant for car owners who want to custom tune the car themselves... the typical release timeline for cobb goes something like Accessport, then ProTuner for their tuners, then StreetTuner....

IMO... right now there's a race to develop parts for the r35 both here and in japan... cobb is the first to release any kind of all around ecu upgrade for the r35... and believe me the market is there...
Reply
Old Sep 1, 2008 | 01:10 PM
  #157  
Buddy Revell's Avatar
Buddy Revell
Registered User
iTrader: (2)
 
Joined: Aug 2007
Posts: 969
Likes: 1
Originally Posted by bboysteele
There might be hope. Response from Joe at Cobb:

Yes when we do our initial release there will be a lot of you who will not see the power gains that you could with a custom tune.

Our tuner work very hard to keep our customers happy. If you are not satisfied with the tune on the AccessPORT all you need to do is get a hold of a DashHawk or some other sort of data logger and data log your car. Then working with one of our tuners they will be able to modify the map on your car to make a custom tune. It's the best way we can custom tune with out having to bring your vehicle to your shop.

Our tuners are more then happy to custom tune a map for you, all you need to do is provide them with data logs.

Joe
This data logger seems to have universal applications and be somewhat inexpensive. Anyone know anything about it? http://www.innovatemotorsports.com/products/ot1.php

Last edited by Buddy Revell; Sep 1, 2008 at 01:17 PM.
Reply
Old Sep 1, 2008 | 02:04 PM
  #158  
chamelieon's Avatar
chamelieon
Registered User
iTrader: (1)
 
Joined: Jul 2008
Posts: 494
Likes: 0
From: New York
Originally Posted by Buddy Revell
This data logger seems to have universal applications and be somewhat inexpensive. Anyone know anything about it? http://www.innovatemotorsports.com/products/ot1.php

this seems like a very useful tool. i created a thread so we can gather user reviews on it to better help us create our own custom logs/maps.


https://www.myg37.com/forums/engine-drivetrain-and-forced-induction/184666-user-experiences-innovate-opentune-tm-obd-ii-can-interface.html
Reply
Old Sep 10, 2008 | 04:13 PM
  #159  
sredish's Avatar
sredish
Registered User
 
Joined: Jul 2008
Posts: 119
Likes: 0
From: Chandler AZ
what's the WERD, yo?


c'moooonnn Cobb.
Reply
Old Sep 10, 2008 | 04:23 PM
  #160  
TerribleONE453's Avatar
TerribleONE453
Registered User
 
Joined: Oct 2007
Posts: 4,404
Likes: 5
From: Chatsworth CA
c'mon!
Reply
Old Sep 10, 2008 | 04:49 PM
  #161  
chamelieon's Avatar
chamelieon
Registered User
iTrader: (1)
 
Joined: Jul 2008
Posts: 494
Likes: 0
From: New York
guys, just found out a few days ago about the UpRev Osiris, which is basically about the same idea as the cobb access port. and Uprev is supposed to be releasing theirs within the next few weeks.

this can only benefit us in the sense that who ever releases theirs first is going to get a bigger chunk of the market.

more info: www.uprev.com
Reply
Old Sep 10, 2008 | 05:51 PM
  #162  
sredish's Avatar
sredish
Registered User
 
Joined: Jul 2008
Posts: 119
Likes: 0
From: Chandler AZ
yea, i posted that earlier in this thread. i'm all about the uprev scenario and good thing for me is they're 4 hours away...
Reply
Old Sep 10, 2008 | 06:14 PM
  #163  
Lou@Amplified's Avatar
Lou@Amplified
Banned
iTrader: (26)
 
Joined: Nov 2007
Posts: 2,762
Likes: 5
From: SO CAL
JOE informed me today that the AP for the g37 is near finished. I will be sending some datalogged files to him so they can finished the stage 1 and 2 maps for our cars. He's going to send me a BETA sample to test out asap so we can test them out and in return send him data logged info of the AFR, TROTTLE POSSITION, IGNITION TIMING, AND other data that can help speed the process for the AP release.

I'll keep everyone updated
Reply
Old Sep 10, 2008 | 07:24 PM
  #164  
Hawaiian72099's Avatar
Hawaiian72099
Registered User
 
Joined: Jun 2008
Posts: 315
Likes: 1
From: Ewa Beach, Hawaii and Guam
Originally Posted by ampdG37
JOE informed me today that the AP for the g37 is near finished. I will be sending some datalogged files to him so they can finished the stage 1 and 2 maps for our cars. He's going to send me a BETA sample to test out asap so we can test them out and in return send him data logged info of the AFR, TROTTLE POSSITION, IGNITION TIMING, AND other data that can help speed the process for the AP release.

I'll keep everyone updated
FINALLY!!!! Can't wait!
Reply
Old Sep 10, 2008 | 07:26 PM
  #165  
peterbanks's Avatar
peterbanks
Registered User
iTrader: (4)
 
Joined: May 2005
Posts: 509
Likes: 0
From: Florida
Originally Posted by ampdG37
JOE informed me today that the AP for the g37 is near finished. I will be sending some datalogged files to him so they can finished the stage 1 and 2 maps for our cars. He's going to send me a BETA sample to test out asap so we can test them out and in return send him data logged info of the AFR, TROTTLE POSSITION, IGNITION TIMING, AND other data that can help speed the process for the AP release.

I'll keep everyone updated
Very Cool.
Reply



All times are GMT -4. The time now is 06:14 AM.