Review Bell Raceworks rear differential brace
#151
Administrator
iTrader: (9)
Anyway, the 4-point brace is still on Bell's website. https://bellraceworks.bigcartel.com/...ck-diff-covers
Last edited by Rochester; 12-03-2019 at 10:42 AM.
#152
Registered Member
iTrader: (5)
Received the replacement today, and that one fit like a glove. Also found the problem. One "tube" was not quite square.
Initial impressions with a 20 minute test drive..... Wow, what a difference!
Excuse the dirty underside.
Initial impressions with a 20 minute test drive..... Wow, what a difference!
- No added NVH, not even a little. Granted I have subframe collars, etc... already.
- Shifts (not only shifting, but also clutch modulation) seem.... smother? A little less sloppy? Improved!
- The entire rear end seems less sloppy.
- May have helped clutch chatter.
- Reduced, and may have eliminated wheel hop. <--- slartibartfast has been waiting for that report
Excuse the dirty underside.
#158
Administrator
iTrader: (9)
Interesting turn of the conversation.
Between diapers and middle-school is a great time. After that, just try and raise two teenage girls at 16 and 19. It gets exponentially more difficult than when they were 6 and 9.
Between diapers and middle-school is a great time. After that, just try and raise two teenage girls at 16 and 19. It gets exponentially more difficult than when they were 6 and 9.
#160
Is your G a 6 spd. manual? I noticed a nice reduction of slop in the drive line. Especially noticeable in the shifter and gas pedal. This part was the finishing drive line touch for me after the motor mounts and transmission mount.
#163
I'm sure i clicked oem differential when i ordered mine a few weeks back from z1, but this is what ended up with.
i guess ill just jack up the car tomorrow and see if it fits because shopping from z1 to canada is a pain in the *** and takes awhile. I saw someone was gonna try this but didn't see his follow up and if it worked out for him.
#164
Registered Member
iTrader: (2)
I'm sure i clicked oem differential when i ordered mine a few weeks back from z1, but this is what ended up with.
i guess ill just jack up the car tomorrow and see if it fits because shopping from z1 to canada is a pain in the *** and takes awhile. I saw someone was gonna try this but didn't see his follow up and if it worked out for him.
Look back through this thread, All of this has been covered/answered.
#165
Are you sure man? I thought i saw Rochesters post of the beefier one stating it was the oem diff cover, and these 2 screenshots are from Z1s website stating mine is the one for the z1 extended capacity differential cover with the cooling fins.
If mine is in fact the oem cover brace, ill be happy as hell though!