24 rows setrab oil cooler installed by weiboy718 for my car

had it for couple months but haven't had a chance to post the pics till now

 

Great post! Did the wrap for the lines come with the kit or is that something you added?

How much more oil did you have to add?

How much space do you have to put the oil filter on and off?

 

we bought the wrap from home depot

im running 7qtz now but i think im supposed to have 7.5qtz

there're plenty of space, i guess the angle of the shots aren't showing it too well

eric drilled holes thru the plastic piece to run the hoses through and it worked out perfect!

 

yeah, the wrap was just something we picked up from homedepot. he's currently using 7 1/2qt lol cuz of his cooler size. 25 row.

what you mean by how much space for the oil filter?

 

i haven't top up the 0.5qtz of oil yet! GAHAHA

 

I thought I read that the oil filter was a pain to take off and with that adapter plate.

 

oh hahahaa! nah, it's the same. there's still plenty of room.

 

What size oil cooler are you running with your Stillen setup?

 

How are you going to drain the oil cooler for ur future oil changes?

 

if im not wrong he is running 18 rows. im sure he'll chime in with the correct info tmr


it's the same way u would do it without the oil cooler. basically the sandwich plate goes before the oil filter and the hoses are run to the oil cooler so nothing's been changed on the oem oil pan

 

no yeah, i get that part, but what about the oil in the cooler itself?

 

u don't. so basically u will always have oil left in the oil cooler but then those get circulated later anyways so yeah

 

whats that extra rear bumper chillin for?

 

That's the downside of having the oil cooler sitting up right. It's not a big deal though! There is ways to mount it up side down but may get leaks though.

That's my friends G35 rear bumper getting worked on.

I'm running the 19row cooler. The 25row didn't fit with the intakes being in front of the grill. I didn't wanted to mount it on the passenger side cuz I don't want it to block off some cold air for the heat exchanger.