Slow build
#17
Administrator
iTrader: (9)
Little bit of almost everything there: bling, handling and driving mods.
You are so-o-o going to love that new clutch pedal assembly. Probably a toss-up between that and the new sways.
You are so-o-o going to love that new clutch pedal assembly. Probably a toss-up between that and the new sways.
Last edited by Rochester; 04-15-2016 at 09:38 AM.
#18
Administrator
iTrader: (9)
Hard to tell exactly, but in that corner pic it looks like you have the stone leather interior on that 6MT. You may or may not be interested in this, but this Winter I put a bit of effort and thought into an aftermarket shift boot that works with our interior.
Don't want to ***** your thread, so here's a link:
http://cimg2.ibsrv.net/gimg/www.myg3...52511b6bd1.jpg
Don't want to ***** your thread, so here's a link:
http://cimg2.ibsrv.net/gimg/www.myg3...52511b6bd1.jpg
The following users liked this post:
NightMarauder (04-17-2016)
#20
NissanFan since 1989
Thread Starter
I am in north seattle
#21
NissanFan since 1989
Thread Starter
installed the pedal assembly....
wow...feels like my 5th gen maxima pedal. extremely soft.
I think I am going to bring the setting back to about 60%.
Also installed the sway bars. set to middle for rear and stiff in front. I went to do a couple runs on a close by entrance ramp...phew..steering response is excellent. Wish i had better tires...smh.
sway bars and pedal should be every G first mods..
wow...feels like my 5th gen maxima pedal. extremely soft.
I think I am going to bring the setting back to about 60%.
Also installed the sway bars. set to middle for rear and stiff in front. I went to do a couple runs on a close by entrance ramp...phew..steering response is excellent. Wish i had better tires...smh.
sway bars and pedal should be every G first mods..
#22
NissanFan since 1989
Thread Starter
as far as the sway bars install...please don't pay anyone to install them for you. Easiest install ever.
For the rear..i removed the mounts all the way to the muffler on one side and dropped it a few inches to slide the bar out.
rear eibach sway bar
For the rear..i removed the mounts all the way to the muffler on one side and dropped it a few inches to slide the bar out.
rear eibach sway bar
#23
NissanFan since 1989
Thread Starter
i had purchased the bluebat overlays as well....tried and failed applying the vinyl. I just couldn't get it straight around the tail light bulge.
#26
NissanFan since 1989
Thread Starter
Originally Posted by Linwozzle
Nice, looks like there might be a little sign of the rear differential main bushing starting to leak?
I just had the car inspected and the differential oil changed.
I'll clean and monitor
#27
Movin On!
iTrader: (13)
Nice job! Those overlays are a PITA until you have a good handle on how the vinyl works w/ heat & stretch (and plenty of patience). Give a look at my tail DIY, it will look much better and isn't too tough IMO.
https://www.myg37.com/forums/d-i-y-i...ils-sedan.html
https://www.myg37.com/forums/d-i-y-i...ils-sedan.html
#28
NissanFan since 1989
Thread Starter
Since last post i have upgraded the '11 G37 to a '13 G37 with black interior...cost about $2000 more but this one get certified warranty and 30k miles.
Obviously i've moved all of the mods to the new one...
Although this one had a front plate so got rid of that with bumper plugs.
Also added a front spoiler...
Obviously i've moved all of the mods to the new one...
Although this one had a front plate so got rid of that with bumper plugs.
Also added a front spoiler...
#30
NissanFan since 1989
Thread Starter
Originally Posted by blnewt
Go away for a month and come back 2 years newer, NICE!
I had Infiniti fax me the service records...and in the notes the previous buyer mentioned keeping old tires for racing
That peeked my interested ..since the service records had the previous owner name, I started doing some CSI .
Found a few videos with him racing at Sonoma racetrack and some other track.
I contacted the dealer and expressed my concern and that the fact that the car was used for racing was not disclosed.
After a few back and forth he told me he had a '13 6mt in stock for a few thousands more.
Next thing i'm on the road to trade it.
Only issue is that the previous owner of this one might have been part of Edward scissorhands or Freddy Krueger family. Scratches on the console. (Debating whether to wrap) . Looks like he was placing his metallic iPhone 4 or 5 on the dash and right on the cigarette lighter cup .
Anyway this one sounds more mechanically sound and comes with the CPO warranty.
Nice driving though...lol
Last edited by NightMarauder; 05-20-2016 at 08:50 PM.