Difference between g35 and g37 htechs on g37?
Thread Starter
Registered User
iTrader: (1)
Joined: Jul 2014
Posts: 37
Likes: 0
From: North Carolina
Difference between g35 and g37 htechs on g37?
I finally was about to order a set of htechs, but before I did I realized it said there was a .3 inch drop and a .6 inch drop in the rear? I was looking for more of a 1.3ish drop which is what I've read everywhere on here saying that that is what comes with the htechs. Could it be because the g37 springs that I was going to buy aren't as low and I need to look into g35 springs instead? Also after contacting them, I was told it did come with a .3 and .6 inch drop and wasn't a typing error.
Interesting when looking at the Tein site it says "2dr Coupe, Lot No P0243285~" and then lists as a -1.5 & -1.1" drop, but like you said the same part # for the G35 is that minimal drop. If anything the G37s should drop a bit more, at least those w/ a 7AT since it's 100+ lbs heavier than the 5AT.
Wonder if it has to do w/ that lot number of the spring, strange
FWIW I've never seen a G35 or G37 dropped on HTechs that only dropped about a 1/2" though
Wonder if it has to do w/ that lot number of the spring, strange

FWIW I've never seen a G35 or G37 dropped on HTechs that only dropped about a 1/2" though
Thread Starter
Registered User
iTrader: (1)
Joined: Jul 2014
Posts: 37
Likes: 0
From: North Carolina
TEIN HTech Springs INFINITI G37
Any ideas as to why there website says .3 and .6 inch drop? Am I missing something?
Any ideas as to why there website says .3 and .6 inch drop? Am I missing something?
TEIN HTech Springs INFINITI G37
Any ideas as to why there website says .3 and .6 inch drop? Am I missing something?
Any ideas as to why there website says .3 and .6 inch drop? Am I missing something?
Also like I said, not sure what that "lot number P0243285" is all about since it's the same part #
Here's the official Tein web application page.HIGH.TECH
TEIN HTech Springs INFINITI G37
Any ideas as to why there website says .3 and .6 inch drop? Am I missing something?
Any ideas as to why there website says .3 and .6 inch drop? Am I missing something?
Yes, like Brad said, if you look at the Tein website that is the correct drop amount for a G35. Also look at the description on the site you listed, it says 1" drop, that is a more realistic drop for the G35. The numbers are all over the place but trust me, it's at least 1.5" and 1.1" for the G37.
BTW when you're ready to buy, look at the forum sponsors for better prices than that website. I bought mine through a vendor here and got a great price with fast shipping. GL
Thread
Thread Starter
Forum
Replies
Last Post
Chris Olson
Audio, Video & Electronics
17
Dec 29, 2025 07:59 PM
Tunerz_Store
Brakes/Suspension
117
Jul 16, 2018 02:04 PM
JoshB
Newbie Corner
28
Oct 15, 2015 03:08 PM



