Does anyone have a spare rear TOP coil spring isolator laying around that they can take measurements of for me please? I'm wanting to get a small spacer to place above it to raise the rear up a little bit, without switching back to stock springs and cutting the isolator.

I was looking on this website at the Style A option and thinking it could fit inside the top of the isolator and give a small ride height boost.

https://www.suspension.com/universal-coil-spring-isolators.asp

Any help with measurements would be appreciated because I don't want to take my spring back off again to check lol

 

Any isolator you buy, you'll need to shave the spring seat's diameter to fit.

For reference, the rear spring is 98.5mm (3.88") ID.

There's a russian seller on ebay selling 20mm (!!!) spacers that fit right up. But...20mm is a lot.

I recommend using a 3-3/4" ID to start. Not much shaving needed. And the lip OD matches the spring well.

https://www.energysuspensionparts.com/9.6101

the 9.6101 is 3/8 height. Duno what height you want.

 

Thanks for the info man!