Metal on metal rattling over sharp bumps

Old May 7, 2014 | 11:13 AM
  #1  
kwaid1's Avatar
kwaid1
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
Metal on metal rattling over sharp bumps

Good morning, I'm brand new to this site and recently purchased a 2012 G37x with 13k miles on 3/29. I noticed last week that there is a metal on metal rattle over sharp bumps or very aggressive rumble strips coming from the front driver side wheel area. It doesn't happen on normal small bumps or on smooth railroad tracks, but only sharp ones. Not sure what it could be. Has anyone ever had this issue and had it diagnosed? I'd appreciate any advice. Thanks for any help you can offer!
Reply
Old May 7, 2014 | 11:38 AM
  #2  
walker39's Avatar
walker39
Registered User
 
Joined: Dec 2012
Posts: 19
Likes: 0
It sounds like the brake dust shield is rattling. I had the same issue with mine (I have a 2010 - shouldnt make much of a difference though) when I drove on rough roads. Take the wheel off and you'll see a small metal shield that surrounds the brake rotor. If the shield is loose when you wiggle it, then that is probably the culprit.

What I did, and I'm sure there are various ways to do this, was take a flat-head screw driver and pry the shield back away from the rotor a little. It should eliminate the metal on metal noise you decribed, and fix the rough-road rattling.
Reply
Old May 7, 2014 | 11:44 AM
  #3  
kwaid1's Avatar
kwaid1
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
Awesome. I will give it a try. Thanks a lot for the quick response. Did you ever find out what caused the issue in the first place? I bought this certified pre owned from an Infiniti dealership.
Reply
Old May 7, 2014 | 11:52 AM
  #4  
walker39's Avatar
walker39
Registered User
 
Joined: Dec 2012
Posts: 19
Likes: 0
No Problem. I'm not sure what, exactly, causes the shield to rattle, but maybe someone else on here could give you more info on that. It's nothing to be too concerned with though.
Reply
Old May 7, 2014 | 03:01 PM
  #5  
JohnsG37x's Avatar
JohnsG37x
Registered User
 
Joined: Apr 2009
Posts: 137
Likes: 6
From: PA
I experienced the same noise and when I was changing brakes and rotors last weekend, I heard the rattle as I was putting my wheel back on. I pushed the shield away from the rotor a little and it stopped rattling.
Reply
Old May 8, 2014 | 09:38 AM
  #6  
kwaid1's Avatar
kwaid1
Thread Starter
Registered User
 
Joined: May 2014
Posts: 5
Likes: 0
Glad I'm not the only one. I called the dealership and the service guy said they have seen this before. I'm taking it in tomorrow and they are going to take care of it. He said that they've seen small pebbles/rocks get in between the plate and the rotor. I'll post the final verdict tomorrow.
Reply
Old May 8, 2014 | 10:32 AM
  #7  
pdpMIATA's Avatar
pdpMIATA
Registered User
 
Joined: Mar 2011
Posts: 315
Likes: 13
From: NYC
Definitely the brake shield. This has happened to me several times within the three years of ownership so far.
Drives me absolutely insane....considering I JUST had this fixed two weeks ago....LOL
Reply
Old May 8, 2014 | 02:02 PM
  #8  
JMS2000's Avatar
JMS2000
Registered User
 
Joined: Nov 2012
Posts: 355
Likes: 18
Yup, I've had the same problem on my front passenger side. As walker39 said, just pry it away with a screwdriver. Either take the wheel off or lift the car and get to it from behind the wheel, whichever is easier.
Reply
Old May 8, 2014 | 04:04 PM
  #9  
walker39's Avatar
walker39
Registered User
 
Joined: Dec 2012
Posts: 19
Likes: 0
I had to pry the shields on both sides of the car more than I would've expected, but its been about 8 months since I did it, and the rattle hasn't come back. My brake shields aren't pretty, as there are small bends in it from prying with the screwdriver, but they are just shields. As long as they arent rubbing in the wheel or rotor, there shouldn't be any issues.

Kwaid, its really pretty easy to do yourself, if the noise ever comes back after the dealer looks at it. Could save you a trip to the dealer in the future . . .
Reply
Old May 20, 2014 | 10:22 PM
  #10  
Scoe11's Avatar
Scoe11
Registered User
 
Joined: Jul 2011
Posts: 117
Likes: 2
From: NJ
Damn. I just noticed this on my 2013 coupe that has 7600 miles. I haven't washed the G since inception 10 months ago!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
blnewt
D.I.Y. Installations/Modifications
37
Oct 17, 2020 11:12 AM
Upscale Speed
Private Classifieds
1
Dec 24, 2015 12:00 PM
faze2988
Private Classifieds
9
Oct 7, 2015 12:05 AM
Msherburneg37xs
Intake and Exhaust
2
Sep 30, 2015 06:39 PM
MrRiv
Engine, Drivetrain & Forced-Induction
0
Sep 29, 2015 04:59 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 03:32 PM.