Hey guys I need to get a rear chamber kit any ideas on what kind I should get, also my front is off a little should get the front as well?

 

I'm pretty sure you mean a "camber" kit. SPC and Eibach are the same parts. The Eibach branded ones tend t be a little bit less expensive. If you want to adjust the front back to spec then get the front arms as well as the rear.

 

I assume you recently lowered your car, you can run a little extra camber in the rear but if the toe can't be brought into spec then you'll have bad tire wear. If you're not lowered too much like on Eibach springs you might just need the toe bolt kit. Anything lower and you should get the Eibach/SPC arms that BlackBetty mentioned.

 

do you have 4WAS in your car?