Rust forming near brake rotor - is that normal?

Thread Tools
 
Search this Thread
 
Old May 8, 2011 | 08:38 PM
  #1  
PascalT's Avatar
PascalT
Thread Starter
Registered User
 
Joined: Mar 2010
Posts: 322
Likes: 0
From: Montreal
Rust forming near brake rotor - is that normal?

I took out my winter tyres this week and noticed that on my rear left side there's a lot of rust forming near the brake rotor. Not the rotor itself but the "middle" part of it. I don't know the name, so here's a picture of what I mean (never mind the text/arrow):



I've seen lots of cars with something similar going on, so I am not sure if it's just brake dust or something similar forming there or if it's actual rust that will eat up my car.
Reply
Old May 8, 2011 | 08:52 PM
  #2  
Black Betty's Avatar
Black Betty
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
It's rust. It's perfectly normal and won't harm your car in any way.
Reply
Old May 8, 2011 | 10:45 PM
  #3  
sobi6111's Avatar
sobi6111
Registered User
 
Joined: Jan 2010
Posts: 55
Likes: 0
100% normal. I have some rust even on my wheel :-) around the hub. 100% normal.
Don't worry.
Reply
Old May 9, 2011 | 12:33 AM
  #4  
ozzypriest's Avatar
ozzypriest
Registered Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 745
Likes: 13
From: Deep South MS
Yes. Mine look the same. It's just suface layer, not a sign of corrosion. If you were putting on new rotors, it should be removed so that the rotor sits as true as possible. I scraped mine off with a little wire brush.

Whoops edit: thought that was your hub. Your hub will look the same and is also normal.
Reply
Old May 9, 2011 | 10:52 AM
  #5  
PascalT's Avatar
PascalT
Thread Starter
Registered User
 
Joined: Mar 2010
Posts: 322
Likes: 0
From: Montreal
ok good to hear.. thanks!
Reply
Old May 9, 2011 | 10:56 AM
  #6  
movinon's Avatar
movinon
Registered User
 
Joined: Mar 2010
Posts: 776
Likes: 6
On a lot of vehicles the surface rust just about welds the wheels onto the rotors, making it very hard to break the wheels loose when removing them. I always wire brush any surface rust and apply some spray silicon or Vaseline in the area that develops rust. That way the wheels come loose real easy when you rotate them.
Reply
Old May 9, 2011 | 10:59 AM
  #7  
PascalT's Avatar
PascalT
Thread Starter
Registered User
 
Joined: Mar 2010
Posts: 322
Likes: 0
From: Montreal
Thanks for the advice.. I will do that.
Reply
Old May 9, 2011 | 11:10 AM
  #8  
Black Betty's Avatar
Black Betty
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by movinon
On a lot of vehicles the surface rust just about welds the wheels onto the rotors, making it very hard to break the wheels loose when removing them. I always wire brush any surface rust and apply some spray silicon or Vaseline in the area that develops rust. That way the wheels come loose real easy when you rotate them.
Good tip. Thanks.
Reply
Old May 9, 2011 | 07:25 PM
  #9  
Djfarhan's Avatar
Djfarhan
Registered Member
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Nov 2010
Posts: 4,412
Likes: 90
From: Dubai, UAE
looks so nasty though!
Reply
Old May 10, 2011 | 01:45 AM
  #10  
G37Sam's Avatar
G37Sam
Administrator
 
Joined: Aug 2008
Posts: 12,173
Likes: 244
From: Doha, Qatar
You can sand it down if its bothering you but it's barely even visible with the wheels on
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rayramg37
G's FS
11
Nov 18, 2015 09:06 AM
T_Buckets_223
Brakes & Suspension
1
Sep 8, 2015 09:49 PM
slawek65
G37 Coupe
4
Sep 8, 2015 09:07 AM




All times are GMT -4. The time now is 07:18 AM.