Does anyone know of an affordable place where I can get my head lights tinted by someone who know what they are doing. I wanna get a clear tint place on them to avoid the faded look over time.

 

in nyc there are plenty of places

 

Laminx sells them Infiniti G37 Coupe (2008, 2009, 2010, 2011) Headlight Covers

I personally would just clean/wax them often to protect them from hazing and oxidizing

 

What kind of wax?

 

Menzerna's Intensive polish works great. I wouldn't "tint" them because that wont necessarily prevent oxidizing. If you wanted to go for a darker look though I would consider getting the internal housing coated or painted.

 

You could use Meguiars PlastX to clean/polish/protect. I normally use this every time I wash my car to clean my headlights/tail lights.

 

Menzerna's Intensive Polish is a pure abrasive, basically liquid sandpaper. There is no protective qualities about the polish. Stick to a pure wax or sealant.

I would recommend just a sealant or wax. Your headlights have a coating similar to clearcoat to prevent oxidation, and until there's oxidation it's best to use a pure protective coating like a wax/sealant in order to preserve the coating on the plastic as long as possible.

 

Post of the year

 

That is a totally inaccurate statement. Have you ever used it? I doubt so since you are referring to it as such.
Its used as a mild compound which can be used to remove oxidation safely without scratching the surface. It's actually not really considered a a compound but rather a polish...

Then you can wax once the impurities are removed.

There are different variants of Menzerna's polish increasing in abrasiveness (i.e super intensive polish)

 

I tried using expel headlight protectors awhile back. These were not easy to work with. They were thick and probably needed quite a bit of heat to become workable. Also, these headlights aren't exactly a flat surface. I failed miserably. Luckily they let me return them. If you must do it, definitely have someone who knows what they are doing.

I had no problem getting the thinner husky headlight protectors on my much flatter surface tundra headlights.

 

you can also try taking off the headlights and painting them!

 

one more for painting the headlights(inside)~~~ PM RaulG on here or I have a local guy who does it. And upgrade to TSX clear lenses if you are going to open your headlights!