voltic

iTrader: (5)

Note how cleanly the tape came off in the fourth pic? Peel from the paint side of the tape as shown and you should have no problem. Good luck!

tharbemiko

iTrader: (1)

^I'll keep that in mind when I re-plasti dip mines. When I plasti dipped mine a few weeks ago, the edges didn't come out perfect despite peeling the tape off a minute after spraying. So I just retaped the jagged edges and quickly sprayed a few coats. Peeled the tape off immediately (total respray and peeling off = 20 seconds) -> came out perfect

Xenolith666

iTrader: (4)

Here's some pics finally.. I basically did the same as the pics above.. taped off the top and bottom... then I had a little fun with the "S" on the trunk..

voltic

iTrader: (5)

Nice! Looks great.

Oh, I forgot to mention, there's no good way to Plasti-dip the emblem leaving the actual Infiniti logo alone. It's going to peel weird if you do it like I did because of the lip on the side.

Xenolith666

iTrader: (4)

no doubt.. i think I must have redone the emblem at least 3 times.. it just didn't come out quite right.. i had done a reverse paint scheme on it, the black parts on the interior I painted blue and left the emblem itself chrome. But it didn't dry right, had some bubbles in it. I loved the look, but not the end result.