do you have pics of your swap?

 

I took one pic when i was unbolting the bumper, headlight,etc and I had a buddy of mine take the rest. smh at doing that, every pic was of his dang finger!

 

08 to 11 sprot swap
here is the one I took when I had everything unbolted, and one after everything was put back!

 

thats looks great, did my thread help at all if you used it?

 

yea all the part numbers was on the money, that thread was a super help for sure! now y'all are killing me. aero front is sick but I think i like the 11 sport front with the aero sides a little more. we will see how i feel in a few days haha

 

I need to figure out what inserts I'm going with. Whether it's the ones with the fogs or without. Obviously without would save me $350, but does anyone know the part numbers for these?

 

Also, am I right in thinking that IP owners can't get their color?

 

i think your correct, Moonlight white is what IP was replaced by iirc

 

Is it true that the 2010 - FX fog light housings will fit?

If so you can find those for about $70 a piece and then just wire the factory fogs down there.


Anyone know how much or the part number for the 2010 Aero lower grille pieces (without fogs)

Sorry to keep asking.

 

The pn's Brad gave me for the lowers grilles have to be wrong, there is no way that the lower grilles that I had on my 2011 sort bumper are the same as the IPL/Aero bumper....Im going to hit up the dealership tomorrow to see whats up.

 

Right. The ones he gave me where like $40 a piece and I could've swore they were almost double that price.

 

So your just looking for the lower grilles without holes for fogs correct? I am still debating if I want to add fogs or not, it would be a lot cheaper not to do fogs. They are 170 a piece and then you have to do washer tank which is 90 and wiring. Easier just to do factory painted Aero bumper, factory painted aero sides, lower grilles/ perfect fitment/ done

 

You only need the washer tank for the fogs? I thought you needed it whether you got the fogs or not... If that's the case I'll leave the fogs for now...That's almost $500 cheaper.

 

you won't need the newer washer tank if you don't do fogs, if you decide to do the fogs the newer washer tank allow the room for the fogs to fit!

i say screw the lower fogs save the money.

 

Pcasey if you get the part numbers get it for w/fogs too, I will be adding fogs to mine.