Once I was done taking out my woofer ( POS and placed a 6.5" 3 way speaker.. It sounds way better than before)

But when I plugged everything back together, for some reason my window switch are not functioning..

I read the "diy door panel removal" and does not say anything about putting it back together and hitting a problem with the window switch.

Does anyone know how to fix this? Because I am currently stuck.

PS my window is in the down position right now

Thanks!

 

Take it apart and reconnect the plug that connects to the switches. You probably didn't plug it back correctly or at all.

 

that happened to me before. jus start the car n leave it for 5 min. it will works back. i think it is the computer laggin or something

 

Close the door and pull up to close the windows.

 

True that.. But I had to like reset the windows with the door close.

Everything works now! Except.. When I am inside the car. I cannot open the door by the handle.. I gotta have someone outside and open it for me..

wtf?!

 

The door handle cable came out of the socket. Put it back in.

 

Yeah I figured. Thanks!

I removed the 10" woofers.. And custom replaced a pair of 6.5" 3 way speakers.. Alpine Type S, treble ftw!

I do not want any type of bass coming out from the speakers, just my aftermarket subs.

Should be a good project!

BTW.. Rear passenger side speakers ARE NOT 6.5", THEY ARE 3"

 

Got any pics ? and what amp are you running to them ? I've been meaning to get around to installing my 6.5 Infinity Components...

 

I'll get a picture of my speaker modification when I am going to fix the handle tomorrow morning.

I am currently running no amps for the speakers.. Just swapped it in and spliced with the tweeter wires.

In my opinion, that woofer is useless. The clarity of the Alpine speaker was just tremendous .

 

pics please?

 

bump, pics or gtfo