LEDs installed for vanity mirrors, doors and license plate
Thread Starter
Registered Member
Joined: Nov 2007
Posts: 499
Likes: 1
From: San Diego
thats weird....i believe they are not in stock because i found them here: http://www.superbrightleds.com/cgi-b...9.1343&next=50, but they do not have the cool whites available. hmm...
Last edited by OGtripleOG37; Oct 8, 2008 at 10:53 AM.
Thread Starter
Registered Member
Joined: Nov 2007
Posts: 499
Likes: 1
From: San Diego
Thread Starter
Registered Member
Joined: Nov 2007
Posts: 499
Likes: 1
From: San Diego
i got mine here: http://www.superbrightleds.com/cgi-b....25304&next=50 they are the 921-x12 wedge base LED bulb. get the cool white color. im still waiting for mine to come in.
id suggest you take a look at this thread...i got all the answers from there: https://www.myg37.com/forums/body-interior-exterior-lighting/175135-a-few-lighting-mods-lotsa-pics.html
id suggest you take a look at this thread...i got all the answers from there: https://www.myg37.com/forums/body-interior-exterior-lighting/175135-a-few-lighting-mods-lotsa-pics.html
Post Whore
Joined: Nov 2007
Posts: 1,887
Likes: 2
From: Toronto, ON
So I'm kind of a newb and couldn't (read: too afraid to) pop the map and step light covers out; I didn't want to accidentally crack any of them. Can someone tell me which side to slot in the screwdriver? (See image links below – I labeled them with numbers)
Thread Starter
Registered Member
Joined: Nov 2007
Posts: 499
Likes: 1
From: San Diego
psyh: ill make a video later today to show you how to take the dome light covers out and the door lights as well. its quite simple actually. you dont even need a screw driver for the door lights. you gotta use some muscle for those bad boys. just pull really hard from the bottom and u would start feelin them gettin loose. the dome lights are actually easier. refer to my picture with the screw driver covered with electrical tape. just wedge the screw driver on the #4 side of ur diagram...and just pry it out. once one side is popped out, u can just unsnap the rest by just pulling down. i hope im making sense, if not ill get that vid up later today. i actually just replaced my dome lights last night. check it out:
led on left. stock on the right
finished product
led on left. stock on the right
finished product
Last edited by OGtripleOG37; Oct 21, 2008 at 11:21 AM.
Registered Member
Joined: Jul 2008
Posts: 1,093
Likes: 0
did you get a chance to make a video,
It would be super helpful for me as well !! I'm scared to do it the wrong way
It would be super helpful for me as well !! I'm scared to do it the wrong way
psyh: ill make a video later today to show you how to take the dome light covers out and the door lights as well. its quite simple actually. you dont even need a screw driver for the door lights. you gotta use some muscle for those bad boys. just pull really hard from the bottom and u would start feelin them gettin loose. the dome lights are actually easier. refer to my picture with the screw driver covered with electrical tape. just wedge the screw driver on the #4 side of ur diagram...and just pry it out. once one side is popped out, u can just unsnap the rest by just pulling down. i hope im making sense, if not ill get that vid up later today. i actually just replaced my dome lights last night. check it out:
led on left. stock on the right
finished product
led on left. stock on the right
finished product
