All the info you need is in the thread, Pothead.

 

superbrightleds.com

 

i have had blue leds from them in my doors as well.... goes great with my athens blue

somthin to think about for more AB ppl out there

 

For me everything fits perfectly, no problems. For the trunk if you want the cover to close USE the 6 LEDS not the 12 LEDS.

This is what I did.

5 LEDS for the doors

5 LEDS for the license plate light

6 LEDS for the trunk light

12 LEDS for the MAP lights

AND my map light turns off completely does not stay on like others have said.

 

For your Map lights, did the 12 LEDS fit perfectly in the socket or did you have to secure it with tape?

 

the 12 LEDs do fit perfectly...

 

Dude 4/20 is my BDAY!

 

Got my lights in, set up is as follows:

Doors: 921-x12 Blue

Maps/Domes: WLED-x5 LED

Trunk: WLED-WHP

License Plate: WLED-x4 LED

Reverse: WLED-WHP

I really like the way it looks, but I also purchased white lights for the doors if I want to change the blues out.

 

Pix!!

 

More Pix!!!

 

It fits perfectly, Just becareful when you remove the cover. I used a flate head with electric tape over it.

 

How hard was it to remove and install the reverse lights?

 

wasn't hard at all for me. I'm not sure how others did it but I just removed the 3 nuts that hold the tail light housing in and popped the bulb out and put the new one in. Total time for all the bulb changes (reverse included) took me less than 30minutes...would have taken less time if I would have figured out the easiest way was to just remove the tail light housing....well that and my wife kept playing with the push button starter!

 

A better method if you don't want indentations in your plastic from the screwdriver is to use something like a membership card, (any card slightly thicker than a credit card would work), and cover that with a sunglasses/eyeglasses cloth and pop it out with that.

I dont like how my reverse leds are secured with tape. I'll prob replace those with some wled-whp and put the 12s in the maps, just hope they are as bright as the 12s. Thanks for letting us know the whps work perfectly in the reverse lights!

 

Those all look good, I just ordered mine. I need to do something to my car anyways