Help Car wont shift into gear
Car wont shift into gear
Hi guys,
I was trying to pull out my A/V unit and splice into the xm input, something went wrong along the way...it may have been because i tried starting it while in drive?
Anyways, the car starts, is in park but wont shift to any other gear, wont turn off with a single click of the push button-it requires a long hold, the gauges arent displaying anything, and the center console buttons arent working other than the emergency blinkers, although everything is properly connected.
I tried disconnecting the negative terminal of battery but that didnt help.
Any help would be appreciated
I was trying to pull out my A/V unit and splice into the xm input, something went wrong along the way...it may have been because i tried starting it while in drive?
Anyways, the car starts, is in park but wont shift to any other gear, wont turn off with a single click of the push button-it requires a long hold, the gauges arent displaying anything, and the center console buttons arent working other than the emergency blinkers, although everything is properly connected.
I tried disconnecting the negative terminal of battery but that didnt help.
Any help would be appreciated
Hi guys,
I was trying to pull out my A/V unit and splice into the xm input, something went wrong along the way...it may have been because i tried starting it while in drive?
Anyways, the car starts, is in park but wont shift to any other gear, wont turn off with a single click of the push button-it requires a long hold, the gauges arent displaying anything, and the center console buttons arent working other than the emergency blinkers, although everything is properly connected.
I tried disconnecting the negative terminal of battery but that didnt help.
Any help would be appreciated
I was trying to pull out my A/V unit and splice into the xm input, something went wrong along the way...it may have been because i tried starting it while in drive?
Anyways, the car starts, is in park but wont shift to any other gear, wont turn off with a single click of the push button-it requires a long hold, the gauges arent displaying anything, and the center console buttons arent working other than the emergency blinkers, although everything is properly connected.
I tried disconnecting the negative terminal of battery but that didnt help.
Any help would be appreciated
https://www.myg37.com/forums/g37-sed...into-gear.html
I take it you only tried disconnecting the negative battery cable after the problem occurred?
Cutting into wires without disconnecting the battery prior to doing any wiring cutting may have likely caused your problem.
Why did you attempt to start the car while in drive?
When an auto transmission vehicle is parked shouldn't the transmission be in Park?
You should have tried to obtain a plug and play adapter to adapt the existing wiring harness without having to cut any wires.
Crutchfield may have them?
Crutchfield: Car Stereo, Speakers, Home Theater, LED LCD TV, Cameras
http://www.crutchfield.com/p_975EPC5....html?tp=61674
Telcoman
Hi guys,
I was trying to pull out my A/V unit and splice into the xm input, something went wrong along the way...it may have been because i tried starting it while in drive?
Anyways, the car starts, is in park but wont shift to any other gear, wont turn off with a single click of the push button-it requires a long hold, the gauges arent displaying anything, and the center console buttons arent working other than the emergency blinkers, although everything is properly connected.
I tried disconnecting the negative terminal of battery but that didnt help.
Any help would be appreciated
I was trying to pull out my A/V unit and splice into the xm input, something went wrong along the way...it may have been because i tried starting it while in drive?
Anyways, the car starts, is in park but wont shift to any other gear, wont turn off with a single click of the push button-it requires a long hold, the gauges arent displaying anything, and the center console buttons arent working other than the emergency blinkers, although everything is properly connected.
I tried disconnecting the negative terminal of battery but that didnt help.
Any help would be appreciated
Ya I didnt disconnect the battery before i began cutting.
The white box is properly connected I double checked.
I did find a blown fuse, "Elec Parts (ign)" . Upon replacing the fuse, double checking the connections, and reconnecting the battery, it blew again and the problems persisted.
The white box is properly connected I double checked.
I did find a blown fuse, "Elec Parts (ign)" . Upon replacing the fuse, double checking the connections, and reconnecting the battery, it blew again and the problems persisted.
Ya I didnt disconnect the battery before i began cutting.
The white box is properly connected I double checked.
I did find a blown fuse, "Elec Parts (ign)" . Upon replacing the fuse, double checking the connections, and reconnecting the battery, it blew again and the problems persisted.
The white box is properly connected I double checked.
I did find a blown fuse, "Elec Parts (ign)" . Upon replacing the fuse, double checking the connections, and reconnecting the battery, it blew again and the problems persisted.
have you re connected the cable that you spliced back to the way it was?
please take a pic of the connector you spliced and post it so i can see what you did excatly.
I know I done f*cked up in my life before....and phew!
Thread
Thread Starter
Forum
Replies
Last Post
JoshB
Newbie Corner
28
Oct 15, 2015 03:08 PM
regimelife
Engine, Drivetrain & Forced-Induction
2
Aug 18, 2015 04:46 PM
Thirty_Seven
Engine, Drivetrain & Forced-Induction
12
Aug 16, 2015 01:48 PM
Sway_NV
Engine, Drivetrain & Forced-Induction
9
Aug 15, 2015 09:36 PM




