Definitely two 10'' subs if you listen to Hard Rock. Gotta catch all those instruments!

 

Trust me, a single JL 10w6v3 sealed is all you need.

 

Must be a sedan with all that trunk

 

Hi Darth, sorry this is so pitifully late but but I finally grabbed some pics of the subs in my car. Theyve been in the trunk for about 18 months now so the "carpet" is pilling

<a href="http://s1289.photobucket.com/user/mleboeuf/media/G37S%20Stereo%20Install/IMG_1616_zps0f451b7c.jpg.html" target="_blank"><img src="http://i1289.photobucket.com/albums/b517/mleboeuf/G37S%20Stereo%20Install/IMG_1616_zps0f451b7c.jpg" border="0" alt=" photo IMG_1616_zps0f451b7c.jpg"/></a>

<a href="http://s1289.photobucket.com/user/mleboeuf/media/G37S%20Stereo%20Install/IMG_1613_zpsf023736e.jpg.html" target="_blank"><img src="http://i1289.photobucket.com/albums/b517/mleboeuf/G37S%20Stereo%20Install/IMG_1613_zpsf023736e.jpg" border="0" alt="Left Subwoofer photo IMG_1613_zpsf023736e.jpg"/></a>

Unfortunately, I found after making the enclosure on the right side that because of the rear seat release handle, the subwoofer on the left side would need to be moved forward about 1.5". This made the enclosure larger than the one on the right.

 

Wow. Where is the amp?

 

There are two RF T400-2 amps under the left sub and a single T500-bd under the right sub. There nestled down below the plastic trim panels that surround the spare tire. The passive crossover networks for the doors, the power distribution block and the turn on circuits are down there too. The 360.2 is in the Styrofoam piece that sits in the spare tire. Ill get pics of all that in a couple of weeks (I hope)

 

i got two dynaudio 182 10s right in the door free air

 

I was tempted to replace the door 10's with those for the woofer component. What crossover are you running them at? Any issues running them free air? Did you put any type of baffling behind the driver at all or only the open door cavity? What amplifier and wattage are you driving it at?

 

I'm running them active, crossed over at 40hz I believe. No issues running them free air, they actually prefer it. No baffling behind the door, just deaden the **** out of it. Real 10s in the door will knock. I'm running a tru tech super billet 6. 100 x 4 and 200 x 2. So they are running stereo at 200 x 2 all active. Any questions feel free to ask

 

Did you open the door cavity to deaden the outside door skin or just apply to what you could reach? I've been itching to open the doors up completely so I can remove that tuna can sound when the doors close but hate the idea of removing the window glass and punching out rivets (which I understand is necessary)

 

I had my installer do it since I have zero time but he just reached what he could. more than enough. I don't hear any rattles