New Toy in my Glovebox - DVD
I was just curious.
Instead of carrying around a stack of dvd's, I've converted most movies and music videos to .mov formats. Less wires, less power consumed. Can create movie playlist. Don't have to reach into the glove box to change or control anything.
Instead of carrying around a stack of dvd's, I've converted most movies and music videos to .mov formats. Less wires, less power consumed. Can create movie playlist. Don't have to reach into the glove box to change or control anything.
Thread Starter
Registered User
iTrader: (1)
Joined: Apr 2006
Posts: 280
Likes: 0
From: Owings Mills, MD
As far as the iPod hookup that would be relatively simple. You would just reach into the armrest and switch the RCA cables to the iPod RCA outputs and tada, you now have iPod video.
Either way very clean install! 
Just keep those DVD's hidden.
Registered User
Joined: Nov 2007
Posts: 641
Likes: 0
From: South FL
Took me about 4 hours to get this installed and have it just right. I decided to install a 1/2 din DVD player in my glovebox and run the wires down the center console to plug into the armrest.
I decided to make this install very clean, so you can never see the wires (unless you open the arm rest and you will see the RCA's plugged in. I mounted an IR-Sensor in the dash behind the AC vent so that I could use a remote if I needed to.
Let me know what you guys think. If you all have any questions on what/how I did this, please feel free to post and I will try to answer everything.
As you can see, it fits quite well in our glovebox. I did however need to do some cutting in the back to allow wires to pass through and needed to use "L" shaped RCA connectors.
I decided to make this install very clean, so you can never see the wires (unless you open the arm rest and you will see the RCA's plugged in. I mounted an IR-Sensor in the dash behind the AC vent so that I could use a remote if I needed to.
Let me know what you guys think. If you all have any questions on what/how I did this, please feel free to post and I will try to answer everything.
As you can see, it fits quite well in our glovebox. I did however need to do some cutting in the back to allow wires to pass through and needed to use "L" shaped RCA connectors.
Registered User
Joined: Oct 2007
Posts: 1,172
Likes: 0
From: t.dot.O
could someone email me or pm me the details as well. altough i have doug's instructions already.
i would like to mount a infrared camera facing the front and have it show up on display when i drive at night d=)
i would like to mount a infrared camera facing the front and have it show up on display when i drive at night d=)
Thread Starter
Registered User
iTrader: (1)
Joined: Apr 2006
Posts: 280
Likes: 0
From: Owings Mills, MD
I'm sure anyone with any car wiring experience could do this. The hard part was locating a wire behind the radio for +12v accessory. All the other work was just running RCA's through the dash and cutting out a small section of the glovebox to make everything sit tight and firm.
![]\[ /-\ ]\/['s Avatar](data:image/svg+xml;utf8,<svg xmlns='http://www.w3.org/2000/svg' viewBox='0 0 50 50'><circle class='avatar-circle-default' fill='%23de8a71' cx='25px' cy='25px' r='20px'></circle><text class='avatar-text-default' x='49%' y='53%' fill='white' text-anchor='middle' alignment-baseline='middle'>]</text></svg>)
