i installed tints early this week and after they were done my navigation won't auto turn day and night by itself, the headlights still do in auto mode, can anyone help on this issue ?

 

The only thing I could think of doing is disconnecting the battery for a few minutes and see if that does anything. Good luck

 

Try adjusting the brightness on the control panel and returning to it's original setting... probably the problem.

Lee

 

OK, slightly old thread but I was wondering this same thing and took some time to discover so hopefully this is helpful for some folks.

The manual doesn't explain well but there seems to be 4 settings for Display:
Auto Day
Auto Night
Day
Night

To set these independly pay attention to the screen title at the top when you go into Setting, Display. Adjust the contrast/brightness/background for each of these while turning headlights on/off as well as with DAY/NIGHT switch.

Hope this helps.