Radar Detectors
oh yea, I almost forgot
the cable that you hook it up with , its an old phone cord I had laying around it took me about 10 minutes to cut it and splice off the homelink wire in the rear view. or you can get pay 40.00 bucks for some probes.
you only need 2 wires, + and - if you hook it up backwards it just wont turn on , if you hook it up right it will. just switch the wires if you have no power.
the cable that you hook it up with , its an old phone cord I had laying around it took me about 10 minutes to cut it and splice off the homelink wire in the rear view. or you can get pay 40.00 bucks for some probes.
you only need 2 wires, + and - if you hook it up backwards it just wont turn on , if you hook it up right it will. just switch the wires if you have no power.
unplug your mirror, peel back some of the plastic housing encasing the wires. I put a small slit in mine with a razor knife, find the + and - and splice into them. attach the phone cord wires to corresponding + or - , plug in , tape up wire housing with electrical tape done.
at first I thought this would be hard, its really not. 10 mins. and some wire cutters and an old phone cord (rj11), electrical tape.
at first I thought this would be hard, its really not. 10 mins. and some wire cutters and an old phone cord (rj11), electrical tape.
Last edited by christian655321; Nov 4, 2008 at 05:01 PM.
unplug your mirror, peel back some of the plastic housing encasing the wires. I put a small slit in mine with a razor knife, find the + and - and splice into them. attach the phone cord wires to corresponding + or - , plug in , tape up wire housing with electrical tape done.
at first I thought this would be hard, its really not. 10 mins. and some wire cutters and an old phone cord (rj11), electrical tape.
at first I thought this would be hard, its really not. 10 mins. and some wire cutters and an old phone cord (rj11), electrical tape.
https://www.myg37.com/forums/audio-video-and-electronics/175561-improvised-invisicord-assembly-and-install-tip-for-radar-detector.html
hmm i read on christian post that you cant have it any higher than he have it. I have the stealthcord on a Bel Rx65 i stealthcord it but it to short so it sitting on top of the rearview kind of sitting on it. Does this really effect the radar? it doesnt seem like it to me
hmm i read on christian post that you cant have it any higher than he have it. I have the stealthcord on a Bel Rx65 i stealthcord it but it to short so it sitting on top of the rearview kind of sitting on it. Does this really effect the radar? it doesnt seem like it to me
I like it up there, because I don't have to worry about it when parked. you can't see if from outside the car.
I cant speak for anyone elses perfermance but mouting is KEY to detection. Front detection may be fine mounted all the way up, your rear and side detection would be LIMITED having it up there. This is a no brainer, the manual even specifies how it should be mounted.
The V1 is dated, so is the solo2. When plugged in the solo2 provided very close performace to the 8500 x2. For wireless applications it is the best that you can get. Dont take my word for it here is the review links so you can see for yourself. Its all about how much you want to spend. the best detectors out there right now are the 9500ix and latest STI. I am actually going to pick up a 9500ix this week, but its 500.00
review of 2008 detectors
http://www.radarroysbuyersguide.com/netshops-sml2008/
review of pre 2008 detectors
http://www.radarbusters.com/brandtestingarticle.cfm
The V1 is dated, so is the solo2. When plugged in the solo2 provided very close performace to the 8500 x2. For wireless applications it is the best that you can get. Dont take my word for it here is the review links so you can see for yourself. Its all about how much you want to spend. the best detectors out there right now are the 9500ix and latest STI. I am actually going to pick up a 9500ix this week, but its 500.00
review of 2008 detectors
http://www.radarroysbuyersguide.com/netshops-sml2008/
review of pre 2008 detectors
http://www.radarbusters.com/brandtestingarticle.cfm
Yeah finagle that the same reason I like it up there it's hidden by the tint in the window thank for answering I was getting worry it was affected the only problem I have is adjusting the rearview but I never use it anyway


