TruLux

iTrader: (3)

Does anyone happen to know what size/diameter the oem shroud is for a 12/13 sedan (xS if that matters).

I am going to purchase a set of halo LEDs however I have the option of buying:

60mm, 70mm, 80mm, 90mm, 100mm, 120mm and 140mm

which size do I need in order for it to fit directly onto the shroud, similar to the following:











I know coupes and sedans are different, so please share both if available.

thanks!

TruLux

iTrader: (3)

Anyone? I'd like to have all the parts ready, prior to opening the headlights. Thanks

blnewt

iTrader: (13)

I have the STi-R lenses to replace the stock lenses, they're 3" OD, the coupes are 2.5" OD, so I assume a 3" ID halo should fit.
http://www.theretrofitsource.com/index.php?cPath=29

TruLux

iTrader: (3)

I'm buying those as well but the shrouds are bigger than the diameter of the lens, so still not 100% sure.

blnewt

iTrader: (13)

The 80mm halo is about 5mm larger than the lens, so that would be the only choice (of the choices you listed) the 90mm would be way too big, the 70mm too small.

3scos G

The ones in the pic are 3" when I bought mine from Luke products I measured and it was 3" so any 3" led ring would fit and it gets glued on top of the shroud on the sedans

main_shoby

iTrader: (1)

reviving a very very old thread
both of the rings should be 3 inch?

Daddy Fat Sacs

iTrader: (15)

Yes both headlight projectors on sedan are 3" lenses and 80mm if your looking for halos/angels

ZahyMatar

iTrader: (4)

I was trying to find an answer as well. The OEM projector can take either a 90mm or 100mm halo. This is coming from LightWerkz and several other guys who do headlights on the G. The turn signal also takes a 90mm halo. Morimoto XSB and Diode Dynamics HD are the best LED Halos on the market for the G.