Made the decision to go with a set of F14s for my first set of aftermarket rims. Planning to have a setup that’ll work well with the turbos so getting meat on the ground will be important. After all my research I think I have the offsets and tire sizes that’ll work but looking for feedback. Looking to run a setup that’s not an aggressive offset and minimize any more camber than what would be useful on the track. Just under flush to flush is the goal.

Front - deep concave
19x9.5 +25
tire option 1 - 255/40
tire option 2 - 265/40

Rear - SDC
19x11 +43
tire option 1 - 295/35
tire option 2 - 305/30

the 265 is a preferred front tire size for the front but it may end up as a 255 to match the stretch depending on what goes on the rear.

295s are a tough to find tire size in a brand and line I’d like to use so it could end up being 285s those would be stretched or the 305s. I know 305s are doable with +45 offset but from the pictures I saw it required some camber.

thoughts and input appreciated.