SBG37

So I recently ditched these....



For some STR607. I'm going to be installing S-tech springs tomorrow, but before I do that I wanted to share some photos at stock height .





To be perfectly honest, I think it looks fine. Maybe a LITLLE higher than I'd like, but not the "4x4 look" people claim. I wanted to share, because there's lots of threads with people asking but few pictures. Hope this helps people with their decision making . IMHO 20s at stock height looks fine. 20s lowered looks fine-er though.

P.s. ride height seems to be accentuated in pics. Looks lower in person.

p.p.s. Will post pics once lowered

mmaandy

iTrader: (2)

I always wondered what it looked. I'll probably stick with my oem 19's and just get springs hehe.

Redfire32

iTrader: (12)

Thanks for the pics. I love my 20's, both of them. But I hate the wheel gap more so with the work wheels vs the Vossens. Not sure why.

xxg00w0

iTrader: (1)

STR607 was one of my favorite( cheapo CV3), stock height is fine but a little lower will be perfect if you don't want it to be too low, you should consider eibach spring, i think they ride better then the stock.

guy from norcal

iTrader: (2)

Will look 100x better with a drop on those wheels.

SBG37

Just had it dropped .. Loving the look.

VaderK52

iTrader: (1)

Love the look and drop. K52 Blue Slate allday baby. I had the S Techs all around but changed the rears to Eibach's for a raked look. Keep an eye on that rear camber tire wear breh. Love the wheels though and thanks for posting up. I think the silver wheels goes best on Blue Slate G's and prob going the same route myself.

guy from norcal

iTrader: (2)

Yeah that looks good.

SBG37

Thanks guys ! Believe it or not, I'm actually sitting well within factory alignment specs in the back thanks to the camber kit. I had it aligned right after spring install; however, I'll probably do a second alignment in a couple of weeks to a month.. Just to be safe

slowbird

That looks good! I like the style of the wheels.

Maybe it's just me...but I would love a picture that wasn't taken from so high...or tilted to the side. It makes it hard to tell what it looks like

axis.

Awesome after the drop. What are you lowered on?

blnewt

iTrader: (13)

Great combo you put together, looking proper!

SBG37

I'm lowered on Tein S-tech springs. Loving them so far... the ride honestly isn't much harsher than stock and body roll is non-existent. This thing stays planted when cornering now.

SBG37

Here's a proper shot