Smoky Quartz Sedan on TSW Bathurst
Thread Starter
Registered User
Joined: Jul 2013
Posts: 157
Likes: 10
From: Boston
You can't possibly mean ten pounds at each corner. 
Is that what you're claiming? And while flow-forming is a better manufacturing technique than casting, it's still not a monoblock forged wheel, or 2- or 3-piece forged construction, so... bragging rights, but barely.
Regardless, they're very attractive without being too blingy. Your car looks great with them on and dropped on swifts.
Is that what you're claiming? And while flow-forming is a better manufacturing technique than casting, it's still not a monoblock forged wheel, or 2- or 3-piece forged construction, so... bragging rights, but barely.Regardless, they're very attractive without being too blingy. Your car looks great with them on and dropped on swifts.
I also sense a bit of exaggeration. It's probably more like 5 lbs per wheel. 25 lbs for the TSW's and 30 for the Niche's.
As a side note: Most multi-piece forged wheels are actually pretty heavy - almost always heavier than a rotary forged wheel. Quality monoblock wheels will usually only save you a couple pounds when compared to a rotary forged wheel (sometimes 1lb or less) but will typically add another $500-$700 per wheel to your bill.
Disclaimer: While I feel my statements are based upon facts, I feel obligated to state I use rotary forged wheels as well. lol
As a side note: Most multi-piece forged wheels are actually pretty heavy - almost always heavier than a rotary forged wheel. Quality monoblock wheels will usually only save you a couple pounds when compared to a rotary forged wheel (sometimes 1lb or less) but will typically add another $500-$700 per wheel to your bill.
Disclaimer: While I feel my statements are based upon facts, I feel obligated to state I use rotary forged wheels as well. lol
Wow, love how the Bathurst look on the G37!
One of my favorite new wheels for 2015, they're light, strong, and priced well!
Heres some nice shots of the Silver Mirror Cut finish we had a chance to snap:
The 20" Bathurst were sold out for about 2 months, but the new shipment is arriving any day now so let me know if anyone is interested in a set!
One of my favorite new wheels for 2015, they're light, strong, and priced well!
Heres some nice shots of the Silver Mirror Cut finish we had a chance to snap:
The 20" Bathurst were sold out for about 2 months, but the new shipment is arriving any day now so let me know if anyone is interested in a set!
No where and when are the meets? I used to go to the ones at Castle Island.
PM me I been looking to get out to one.
Reserved
Thread
Thread Starter
Forum
Replies
Last Post
Tunerz_Store
Brakes/Suspension
117
Jul 16, 2018 02:04 PM
aktif8
Private Classifieds
40
May 23, 2016 11:56 AM
johnadlertech
Brakes, Suspension, Wheels & Tires
4
Sep 14, 2015 12:22 PM
johnadlertech
Private Classifieds
7
Sep 14, 2015 12:18 PM