Well Im back to square 1 after the wifey shot down my last request for some Avant Garde 580's in a burshed antique bronze. Heres what I'm looking for:

20" rims to fit on 2010 G37S Sedan thats lowered on Eibach springs
Must clear BBK (obviously)
super concave
looking to run 275/30 or 285/30 in the rear

My main mission is how deep the concave of the rim is

Have a few rims in mind:

Forgestar F14
Concept One CS55
Niche Apex
Rohana RC7
Vertini Magic

Feel free to make suggestions and vendors/sponsors nows your time to chime in. Thanks in advance!

 

The MRRs have a deep concave and are budget friendly
HR10 Wheel - MRR Design
Quite a few other Niche models that might work for you
http://www.nicheroadwheels.com/sport-series-c-1772.htm

 

Here's a pic to show the concavity of those MRRs

 

+1 On the MRRs! They look nice and classy.


.......have you looked at the Miro Wheels?

 

Do you have a preferred style? Fat spokes, thin spokes, number of spokes, mesh style? I actually looked into F14 before too but IMO to get their deep concave you must get very aggressive offset.

I'm not sure how deep your wallet is but just to throw another suggestion...
360 Forged: Performance Automotive Wheels Concave Forged 3 Piece Wheels



p.s. I dont like your wife because she banned the AG580! lol jk but I dont get why tho???

 

Platinum, those Miros have a nice deep concave looks like only in +20 offsets though Their whole linup has deep concave style, too bad the offsets are so aggressive, but common w/ super concave designs.

Some of the VMRs are available in 5x114.3 patterns and they usually have nice concavity, might be worth a look
Home Page - VMR Wheels



I think wife vetoed the AGs since the custom finish was big $$$, so I'm guessing 3 pc forged wheels would suffer the same fate.

 

As for design I mean I'm pretty open...I would lean more towards the mesh style, but I dont prefer alot of spokes as I'm ordering some slotted and drilled rotors so I want to show them off as well and yea I would love a 3 peice forged set but would prob be divorced if she ever found out the cost.


Funny you mention VMR...my first choice was the 710's, but I was told they dont clear BBK w/o spacers and I dont want to run them and the largest they come in is 19". As for the AG 580's, the price for the 3 stage PC finish was actually pretty cheap IMO. 20" in that brushed antique bronze shipped to my door was $2100.

I may check into the VMR's again just to triple check the fitment upfront but not holding my breath, think I may try and talk the wifey into staying with the 580's just not in a custom color

 

Those AGs do have a nice look, you could always paint them down the road, although those custom finishes GetYourWheel offers are incredible
Maybe you could tell the wife that the cost of selling your stock wheels might help (if you would sell them).
The only VMRs I've seen on a sedan were the 710s and they looked great but real aggressive offsets so not sure if that's your thing. I doubt they have offsets in the +35 to 45 range

 

ah yea just confirmed...710's come in 19" with F 19x8.5 +35 R 19x10 +25 apparently these are made for the coupe more than the sedan as I dont care to run that aggresive. But tell me the AG310's isnt the EXACT same rim as the 710?????

 

Doubt it's exactly the same but about as close as you can get

 

Have you looked adorable dpe's

 

Forgestar allows for custom offsets and also a number of concave profiles. I am very happy with my F14s in Bronze Burst. Niche also has a number of wheels with a concave face.

MRR makes the GF6 which also have a nice concave profile and is budget friendly as well.