Hey guys

So I have done plenty of searching through the forum and I was able to find of that I need to keep the front and rear within 3% rolling diameter of each other and also within 3% rolling diameter of the stock tire size on my 2010 AWD coupe.

I just want to check and see if anyone has experience with the below mentioned wheel offsets on the x-coupe and if they had any issues with rubbing. I'm lowered on eibach prokit. I see many non x coupes using this size but not sure if if there is something else I need to consider b/c of awd.

Planning to go with Vossen CV1:

20x9 +32 FR
With 245/35 tires

20x10.5 +45 RR
285/30 tires


THANKS

 

Those will fit just fine. I run those tires with a +32/+40 setup and no issues after ~12k miles. See photos here for what it looked like when I still had the Eibachs on.

 

You'll be fine. I had the same CV1 setup on my X with Eibach drop. Also, I believe the rear offsets are +42 unless they've recently changed it.

 

That fitment is PERFECT!!

 

Thanks all on order and I CAN NOT wait to get them Will post pics once installed!!!

 

I like the fitment... looks good