revs per mile

Thread Tools
 
Search this Thread
 
Old Jan 12, 2011 | 04:04 PM
  #1  
novaleadfoot's Avatar
novaleadfoot
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2010
Posts: 630
Likes: 0
From: Fairfax, VA
revs per mile

Looking to go to a staggered setup on my G37x...tires/wheels fit but there is a 4 revs per mile difference between front and rear

fronts are 245-40-19 and rears are 275-35-19

speedometer = 60 and actual speed is 60.3

diameter, circumference, etc is only millimeters

but....will 4 revs per mile have any negative effect on the Infiniti AWD system?
Reply
Old Jan 12, 2011 | 04:17 PM
  #2  
Steveo47's Avatar
Steveo47
Registered User
iTrader: (8)
 
Joined: Jan 2010
Posts: 1,804
Likes: 6
From: Edmonton, Alberta
it only makes a difference if the rolling diameter of the times is more then 5% different or maybe its ten. Someone who has more experience then this will chime in. BUMP
Reply
Old Jan 12, 2011 | 04:58 PM
  #3  
novaleadfoot's Avatar
novaleadfoot
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2010
Posts: 630
Likes: 0
From: Fairfax, VA
Originally Posted by Steveo47
it only makes a difference if the rolling diameter of the times is more then 5% different or maybe its ten. Someone who has more experience then this will chime in. BUMP
front diameter is 26.71 inches...circumference is 83.91 inches

rear diameter is 26.57 inches...circumference is 83.47 inches

looks to be considerably less than 5%...actual diameter difference is .5% (one half of one percent)
Reply
Old Jan 13, 2011 | 12:08 PM
  #4  
Steveo47's Avatar
Steveo47
Registered User
iTrader: (8)
 
Joined: Jan 2010
Posts: 1,804
Likes: 6
From: Edmonton, Alberta
Your good tO go then!
Reply
Old Jan 13, 2011 | 02:10 PM
  #5  
novaleadfoot's Avatar
novaleadfoot
Thread Starter
Registered User
iTrader: (1)
 
Joined: May 2010
Posts: 630
Likes: 0
From: Fairfax, VA
Official word from Infiniti customer relations technical division (800-662-6200) is that we may put any wheel/tire combo on the AWD as long as the overall diameter/circumference stays the same as stock.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
redlinernyc
Engine, Drivetrain & Forced-Induction
10
Feb 29, 2016 11:06 PM
EnYcee-G
Private Classifieds
4
Sep 3, 2015 04:35 PM
Digilog
Engine, Drivetrain & Forced-Induction
4
Aug 17, 2015 03:54 PM




All times are GMT -4. The time now is 07:29 PM.