i;m looking to buy a set of Volks GT-V theyre 19x9.5 +30, 19x10.5 +24 that came off a 350z.. i wanted to know if it would work on my G before i buy them.

thanks !

 

I don't think the rear will clear without spacers

 

Not sure about spacers or not that will depend on the design of the wheel but they will probably stick out just a little bit unless you bring the camber in a bunch.

 

I"m sure it will clear with some negative camber...

 

thanks for the kind help guys! much appreciated! and i'll chase after wheels so i can get ya some pics!

 

im pretty sure they will fit. no need for negative camber if you are not dropped.

 

take pictures of the rear also when you do get it if you are. i would like how much it will stick out. thinking about getting a set of time attacks. 9.5/10.5 +22, so they will almost be the same specs.

 

i'm 60% sure im getting it.. just waiting for someone to buy my stocks! when i get the wheels im planning to dropping on some springs... either Teins or H&R

 

u dont need spacers! spacers will make ur wheels stick out even more!
they should clear, u need some negative camber, stretch some tires, and prolly a minor fender pull!
the rears are going to be close to wut i have! i have +15 on a 10 in the rears!
front should clear easily witout a problem!!

gluck!

 

if ur going with H&Rs ur gonna have to run crazy camber!!!!!
H&Rs are wayyyy too low!

 

gigga,
that was the spec that iw as going to buy off some guy on driver
but they will stick out even more than mine right now, thats why i didnt buy mine. r u getting it from SIN3? ur gonna have to run -3 in the rear in order to not rub on a drop.

 

Yeah that know that I think about it.. I'm sorry I said you would need spacers as they won't be necessary for this specific application... Good luck.. Be prepared to ruin your tires very quickly with the H&R springs.. I had them and they give you really bad negative camber

 

get a camber kit?

 

Gigga, -3 is a lot. I got mine set to about ~-2 and tire wire is becoming noticable