Category: Wheels & Tires
Price: $2600
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan, Other Model G's
Location (State/Prov): CA
Item Condition: Used
Tire/Wheel Type: 19

Greetings fellow G37 owners!
It's been a good and awesome run with my g37s sedan but I parted out and traded in for a 2016 Stingray (amazing car).

Model name Work Gnosis CV202
FRONT
19 x 9.5 +22 Work R-Disk (semi-concave)
2 x Hankook V12 Evo2 // 245/40r19 with great thread life left.

REAR
19 x 11 +25 Work W-disk (max concave)
1 x Hankook V12 Evo2 // 275/35r19 with great thread life left.

Have the original packaging with license plate frame too.

These wheels were spec specifically for my g37, I gave a shop called EVASIVE MOTORSPORTS (socal) the specs and they sent it to work wheels japan.

It was recently powder coated to semi gloss black (has a similar satin finish)
So you won't see any type of curb rashes.
Along with the part out, I also have Tien S tech springs (infiniti g37 sedan RWD), SPL Front Upper Control arms for camber adjustments.
Two wheel spacers for the front wheels.

LOCAL OFFERS TO LOS ANGELES ONLY.
My name is Kenny and PM me for best offers or phone number to contact.

Thanks, and it's been a great run!

 

center caps too?
nice set, glws

 

Center cap was lost during the powder coating process.

 

I would've flipped #%*@ if they lost my Work center caps!

GLWS!

 

+100. Slap a ho.

 

hope the coating was on the house then

 

yep it was a good price! and it didn't matter much to me because I can't fit these on my Stingray, otherwise I would just re-drill bolt pattern.

The shop is still trying to find them for me but I'll just say without center caps for now.

 

Here are some more pictures
Original color back when i first got these. they sat nice!

 

How about this?
I'll include the Tien S tech, spacers, and front upper control arms.
That's $500+ retail for free.

 

bump. need this out of my room!

 

lowering to $2600

 

Changed the price to $2600 in your original post for you!

GLWS!

 

Bump
Again these comes with 3 tires, a freshly done semi gloss black powder coat, tien s tech springs, front upper control arms, two 20mm spacers.

 

what kind of mod is needed to fit on a sedan fenders

 

For rear wheel drive g37 sedans, you have two routes to go for fitting these:
1: Rear Camber arms and iirc -6 degrees camber.
2: Rear Camber arms -3 or -4 and slight fender pull.

Either direction you go, you'll need rear camber arms, along with toe bolts because when i went past -4 i needed toe bolts to correct the toe from cambering. Car was on Tein S tech lowering springs.

For the front wheels, you're fine, nothing needed.