Category: Wheels & Tires
Price: $1800
Private or Vendor Listing: Private Listing
Part fits: 2010+ G37 Coupe, 2010+ G37 Sedan, 2008-2009 G37 Coupe, 2008-2009 G37 Sedan, Other Model G's
Location (State/Prov): FL
Item Condition: Used
Tire/Wheel Type: 20+

Based off of my measuring, the wheel specs are:
20x9 +38 (2.25" lip)
20x10.5 +31 (3.75" lip)

Tires: Nexen N3000
245/30/20
285/30/20

The wheels have brushed/cleared centers with a polished lip. The wheels could definitely be refinished, as the clearcoat on the centers is peeling. Since I assume the buyer will have them refinished, I did not bother polishing the lips but that's all it will take for the lips to shine line new. The rear tires should be replaced. The fronts have decent tread left, but 1 tire needs a patch after I removed a nail from it.

I had them on my G35 coupe, but sold the car. I tried fitting them on my Mazda 6, but the rears looked so dumb (see last picture for a laugh).

My asking price takes into consideration the $500 to have the wheels refinished in whatever color you'd like, around $400 for new rear tires, and $20 to plug the 1 front tire.
Asking price: $1800 plus shipping







WHEEL 1


WHEEL 2


WHEEL 3


WHEEL 4


FRONT TIRE 1


FRONT TIRE 2


REAR TIRE 1


REAR TIRE 2


LAUGH

 

I know Iforged doesn't publish their offsets, so what measuring was done to find them?
Just curious big guy.

 

It's simple actually. You take the width of the rim and divide by 2. Then lay a flat surface over the backside of the wheel and measure the distance between the back of the wheel hub and the flat surface you just place on the backside of the wheel. Take the distance mentioned above and subtract the width/2 to find the offset.

Example: rear wheel width is 11.5" from end to end. Divide that by 2 and you get 5.75". Distance between the hub and flat surface is 7.25". 7.25" - 5.75" = 1.5" or 31mm.

 

Hmm, never done it that way...always did hub to middle point
Good set of wheels though.

 

Had a friend come test fit these on his LS430. It looked great, but he needs a 5mm spacer for the front and extended studs.

 

you email me the pics on you g lp_adam_lp@hotmail.com

 

Still for sale

 

PM sent!!