Maybe a one piece 9.5 wheel doesn't fit all the cars a 9 wheel fits. Vossen would be loosing customers if that's the reason.

You want a big lip with nice concave get 3 piece wheels.

 

do they do a 35 and 37 offset used on gt30's to get a wider lip or is that just not possible with a one piece vossen wheel?

 

+1 Lookin clean VONYC

Whoa u went +5 in the front? Thats with the s-tech drop & stretched tires? Any rubbing with that setup?

Im running +13 all around and the front i can deff go more aggressive but i do not want to rub & want full turning radius. On the rear its poking but i need to stretch the tire more



Glad to see that people are moving up from +30 offsets

~ 20 offset is perfect for the G running normal sized tires

Im running Ichiba/Project Kics hubcentric spacers along with hubrings on my volks. No vibrations here

 

Well w my 5mm akata spacers , they are just a flat spacer !!!

 

Answered your own questing. Simple Vossen one piece can't go more concave not because of offset but because wheel design and manufacture. If it was more concave it wouldn't be safe for the wheel.

 

No rubbing with +5 and 235/30/20 in the front. I had a +20 offset with a 15mm spacer.

The spacer issue to let you all know. If you want to run a spacer and get no vibration you must buy a hubcentric spacer. Project kits sells perfect ones with exteded studs bolted on already.

The spacer that Diego had was a flat plate that went on the stock studs. If you use that the it takes spacer away on the stock hub for the hubring to sit on, thus causing vibration......

 

Yes exactly ^^^^ well said X ....

 

Silver is definitely the right choice! I hate black rims....

 

Very nice!

I'd like to see this set up on a AG or PG.

 

So Von. Just to confirm.
with my 20/25 offset on S-tech,
I wont rub with 235/35/20 and 275/30/20?
Even with ppl on the rear seats?
I currently have 235/35/20 and 265/30/20

 

No rubbing with 275/30/20 rear and +25 ... only thing I have my bracket shaved so I can't tell you it won't rub if the bracket isn't shaved. There is still enough room for a 5mm spacer so it's possible it won't rub if you have the bracket.

 

Josh go 245/35/20 285/30/20 !!! Just set rear camber between -2.0-2.5

 

I think after burn this generals out, I wanna try 245/35/20, and 275/30/20. I dont want to have any - camber. ANd yeah I have brackets shaved.

 

That's the way to go...

 

Need wider tires on those wheels. The tires you chose are too small. Just look at the gap on the rim of the wheel.