Northern California San Francisco, Oakland, Sacramento, San Jose, Pleasanton, etc.

HFC install Bay Area??

Old Nov 28, 2016 | 05:51 PM
  #1  
gipl's Avatar
gipl
Thread Starter
Registered Member
 
Joined: Jun 2015
Posts: 47
Likes: 0
From: SF Bay Area
HFC install Bay Area??

Hi all,

I've called at least 5 different muffler shops in the Bay Area who all say they can't install my HFCs because of smog issues. Another group of 5 are charging me over 200 for the installation. Anyone who's had experience with this have any recommendations?

Thanks!
Reply
Old Nov 29, 2016 | 10:05 AM
  #2  
Kris9884's Avatar
Kris9884
Registered Member
iTrader: (3)
 
Joined: Feb 2016
Posts: 2,073
Likes: 202
From: MO
I installed my own and would say anything under $300ish is a fair labor charge.
Reply
Old Nov 29, 2016 | 12:43 PM
  #3  
reNeglect's Avatar
reNeglect
Registered User
 
Joined: Oct 2015
Posts: 124
Likes: 13
From: Calgary, Alberta
Its fairly easy to install yourself, its mostly time consuming and annoying because of the demon bolt... if you do want to do it yourself, i would recommend...

two person job, 14MM shallow socket from underneath, the add 3 inch 1/2 extension from underneath after, one person from the top with 3 x 10inch or 9inch extensions on a breaker bar, person from underneath to guide the extension to "Link" then just snap the bolt off.
Reply
Old Nov 29, 2016 | 01:04 PM
  #4  
Kris9884's Avatar
Kris9884
Registered Member
iTrader: (3)
 
Joined: Feb 2016
Posts: 2,073
Likes: 202
From: MO
That's almost exactly what I did^^^.. If you loosen and remove the steering wheel joint its a breeze to get to. Just make sure to mark it cuz if you put it back on with even 1 tooth off you'll not only have a crooked steering wheel but it'll throw a bunch of codes until you adjust it again.
Reply
Old Dec 2, 2016 | 11:25 PM
  #5  
kavcheung's Avatar
kavcheung
Registered Member
iTrader: (2)
 
Joined: Jul 2015
Posts: 99
Likes: 8
From: 415
Check your PM bro!
Reply
Old Dec 3, 2016 | 11:01 PM
  #6  
Z97's Avatar
Z97
Registered User
 
Joined: Jun 2016
Posts: 36
Likes: 1
If you got the tools do it yourself

Make sure you got like 2-3 hours on hand lol
Reply
Old Dec 6, 2016 | 09:06 PM
  #7  
SkyG37's Avatar
SkyG37
Registered Member
 
Joined: Dec 2015
Posts: 361
Likes: 49
From: Bay Area, CA
Mine coated 120$ in San Mateo but idk if he's willing to do it to anyone. Also a shop in San Jose. Can't say the name but use Google.
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:09 AM.