I am about to get my Nismo Sways and I am also looking for springs as well. I did some research and I came across the Tein H Master Luxury Springs. I like them because they only lower your car 0.6mm(front) and 0.3mm(rear). I want springs that keep it under 1 inch. Does anyone haves these springs or know of others springs that I should be considering?

Here is a link

http://www.350z-tech.com/zwiki/Part:Springs

 

I'm probably going to get a set of the 350z h-tech. Heard the g h-tech sucks.


~Khoa

 

Yeah I was looking at both. The G h-tech only do +5% front and -22% rear, which is a +27% roll stiffness transfer to the front. The 350Z h-techs do +14% front and +11% rear, which is a +3% transfer to the front. I agree w/ you on getting the 350Z h-techs.

 

^^ stop trying to sound all educated.

 

I chat with one of the guy from the Florida club, him and a buddy started parts store and he's offering me $145 shipped for the h-tech. Which is pretty decent and I think is the cheapest price I have seen. I've seen $150-155 shipped else where. If anybody else is interested, I can set up a groupbuy and he might be able to to know $5-10 or so off. I think I would need 5 peep(4 others, cuz i'm getting a set). But he might be able to lower with if we buy 3 sets, who knows. So whoever's interested, post up. worst case, it's still a better deal than anywhere else, unless somebody found a cheaper spot. Obviously, this would have to be shipped to one location. I'm more than happy to set-up and organize this if we have good interest. I want to help the dude's business out and get us parts cheaper as well.


~Khoa

 

ya, go with either the h tech for the 350z, or espelir gt. I have the espelir gt on my car and the drop is about .5 all around. I like the drop and feel of the springs. I have 20's so I did'nt want a large drop.

Good luck.

 

I am more educated than you michael

 

Count me in for the h-techs. Make sure they are the ones for the 350Z though.

 

would it be the same price for 350z S techs?

 

LEK - He said s-tech are $135 shipped. This is for the Z.

All - Keep in mind, those that are interested, most likely, in order to help reduce cost of shipping, we might have it shipped to one location. As stated before, I'm willing to organize this for those who are interested. I obviously can't and won't front the money, so I'd need some deposit. But that's further down the road. Right, know, just seeing who wants what.

~Khoa

 

doesnt lowering your car affect other suspension components if you dont replace them as well?

 

I think it's mostly the shocks that's effected and your camber is off. Some goes with aftermarket shocks such as the Tockico D-spec. But I can't afford that and think the stock shocks should handle it for a good while. Don't feel it's that big of a drop and different in spring rate for the coupe 6MT and lesser of a different with '05 sports tune suspension. I can always get shocks down the road if they go bad. There is a vendor selling D-spec and h-tech for $640 shipped. Think Jim (jee-35) got in on that.


~Khoa

 

i will probably do this... 135 sounds great to me. how long before i have to give a definite answer?

 

I just installed some of the Tanabe NF210 springs and I love 'em.. Chad @ Riverside Infiniti has them pretty cheap too.. I'm not going to quote anything but they were cheaper than $135

 

CLOK FIGHT!