AAM meet 06.02.07 (dyno chart & pics inside)
Thread Starter
Registered User
Joined: Mar 2006
Posts: 58
Likes: 0
From: Crofton, Maryland
I cant just walk in there with my dyno sheets in hand and bitch to them why I didnt get the advertised 8-15hp gain. they'll just tell me to fuvk off.
It'd be a waste of a trip. Im happier here at home just posting hard evidence that the flash is useless, at least to me it was.All they CAN say is "every application is different" & yours didnt react as well as others.
Registered User
Joined: Apr 2005
Posts: 3,921
Likes: 0
Originally Posted by Ralph0064
here ya go fellas: Got the car dynoed at Extreme motorsports this morning @ 10:00am. I will say, the extreme staff wasnt the brightest
when it came down to knowing much about G35's. I'll cut em' some slack since they specialize in evos & I was only there for the dyno.
Sorry 'bout the lightness of the dyno sheet. Its hard to read even in person.
The car showed absolutely NO IMPROVEMENT was so ever. I take the differences in hp/tq numbers as variances between dynos. With that said fellas, I went thru the motions and I tested AAM's product for worthiness. At least this could help someone make a decision on wether or not they want to spend the $$$$$ for it. 
Im throwing in the
card on this one. Its not like I dont have plenty of breather mods, ya know 
when it came down to knowing much about G35's. I'll cut em' some slack since they specialize in evos & I was only there for the dyno. Sorry 'bout the lightness of the dyno sheet. Its hard to read even in person.
The car showed absolutely NO IMPROVEMENT was so ever.
I take the differences in hp/tq numbers as variances between dynos. With that said fellas, I went thru the motions and I tested AAM's product for worthiness. At least this could help someone make a decision on wether or not they want to spend the $$$$$ for it. Im throwing in the
card on this one. Its not like I dont have plenty of breather mods, ya know 
Registered User
Joined: May 2007
Posts: 6
Likes: 0
From: Washington D.C
Ralph , Ralph , Ralph !!! We can both go to AAE and Bit*h ! I go mine done a few day before the meet up there . I have the platinum 06 with the 20 inch Asantis that was on the Skyline Drive Meet with you guys . We have almost the same set up with everything . My last mod was a new clutch and light weight flywheel before the flash . MY CAR FEELS EXACTLY THE SAME !!!!! No difference . The reason I did the flash was another thread that a dude did a flash and his car was like night and day ! That is exactly what I didn't get ! I really want my money back ! That sh*t was a joke ! Tell me when to meet you up there and we can get our money back ! Let me know !!!
There's no guarantee that they'll be willing to work. But bad press is an expense no company want to take. You have simple prove that NOTHING was altered. If they argue, then simply ask them, what evidence do they have that it was done other the sticker that they put on and 500 extra rpm. Perhaps they haven't gotten the rev up ecu figured out like they thought they did.
~Khoa
~Khoa
Registered User
Joined: Apr 2005
Posts: 3,921
Likes: 0
Originally Posted by civicguyinva
I should be getting my reflashed ecu back shortly and will be at the g35 dyno day for results. I'll post them as a second opnion to back up if this reflash is really worth anything.
Originally Posted by civicguyinva
I should be getting my reflashed ecu back shortly and will be at the g35 dyno day for results. I'll post them as a second opnion to back up if this reflash is really worth anything.
~Khoa
Thread Starter
Registered User
Joined: Mar 2006
Posts: 58
Likes: 0
From: Crofton, Maryland
I have the platinum 06 with the 20 inch Asantis that was on the Skyline Drive Meet with you guys . We have almost the same set up with everything
I do wonder if they have several types of flashes available. I had to tell them all my mods (have no idea why) before doing it. If a flash wasnt for me then tell me, maybe a UTEC was a better route. I think Im gonna shoot them an e-mail with my findings and see how much they really care.
I should be getting my reflashed ecu back shortly and will be at the g35 dyno day for results.
back from where? Techno?
Registered User
Joined: Jan 2007
Posts: 74
Likes: 0
From: Fairfax VA
Yes I have a baseline dyno. It was not done at the DTM location, but hopefully the numbers will still give a rough idea if there is a big change. I car pool and the G35 just sits in a parking spot until a track day for the most part so instead of driving up to MD I just shipped it. The guys at AAM were really good as far as customer service. I have a new issue though. My upper plenum cracked. There was barely any pressure on the bolts and it cracked the plenum enough that it was leaking air badly. I have a new plenum on the way, but damn....what a POS.
Registered User
Joined: Jan 2007
Posts: 74
Likes: 0
From: Fairfax VA
Yea, OEM. I have a feeling there was a stress crack or something in it already because I had the bolts hand tightened and went back around with a ratched gently just to try to keep the pressure even and everything aligned right and CRACK! I luckily know someone who got me a rather good deal on a new one $170 shipped to my door. IF this one cracks too I'm gonna be irrate.
cracked plenum.... ouch, that sux @$$.
I'm currently debating on getting a new dyno done before I get the AAM plenum splacer and intake put on. I have a new air filter, last one was dirty as all HELL. But, dunno if it'd be worth it or not. And then get another one right after I get the intake parts put on. Opinions?
I'm currently debating on getting a new dyno done before I get the AAM plenum splacer and intake put on. I have a new air filter, last one was dirty as all HELL. But, dunno if it'd be worth it or not. And then get another one right after I get the intake parts put on. Opinions?
