Trev, ima be doing the autocross on Sunday but i can help if you guys are still working on it after i'm done. i'm not really sure how long the autox will take.

on this note, who's all going to this autox thing????

HAPPY BIRTHDAY MIKE

 

Depending if Lance is free and this is a go.. Im thinkin I will leave work early around 12 or 1 then head over.. and it should be done by 3 for sure even if we run into problems. Im gonna hit all the bolts up with PB blaster the night before and since car hasnt seen snow since that last time we turned these bolts we should be good.

 

what type of tools??? Otherwise, I have no prob doing this. They seemed to start getting along with Louie pretty well at Tevi and Tina's a few weeks ago.

 

^^^ and after that you'll just need to slap the wheels on

Very nice Happy bday Mikey!!!

 

Happy Bday Mikey!!!!!!!!!

 

I have all the tools:

factory jack
floor jack
1/2" ratchet (3/8")
misc 1/2" extensions (3/8")
17mm socket
12mm socket
19mm socket
17mm box end wrench
breaker bar and big *** wrench (extra leverage)
torque wrench

Meels and Zel is gonna be with their auntie on Sun at the horse expo.

I actually will still have to dremel out my rear toe bolts.. I dont want to do that yet b/c it will prolly mess up my VDC and I want to wait till I get the wheels to do the fender roll/ dial in coils/ toe bolts together then get aligned at Tire Proz

 

^^

Then I will just have to wait for my front fenders and rear bumper to get back from paint and it will be a wrap... finally starting to c the light at the end of the tunnel!

 

Your gonna want an impact wrench. Makes it a lot easier lol.

 

Last time we did it we used a breaker bar b/c we didnt want to break the bolts.. its not gonna be that hard. Once we break it I have a Dewalt impact gun that we can use to take off and put on all the bolts.

That should significantly speed up the process.. I think I took like 5 minutes to mount all my wheels after I finished my brakes and that included torquing the wheels.

 

HAHA! Thanks Peng! Been quite a busy one at that and hoping it will die down by Sunday sometime.....we shall see! I'm really hopeful but who knows. Come this Saturday it's only one week until the 5th soooo idk

 

Janik's comment i 100% concur on...and was the only reason I asked. I probably won't do another suspension install without air tools.

 

I dont c us having any issues but if you want I can reserve some time at First Gear and we can use the lift and air tools on Sun instead.

How does that sound?

 

Turns out they are closed on Sun

Looks like I will just knock this out at the crib when I get home.

 

My Parrot Quadricopter shipped today via UPS! It will be here around 5/2

 

Whoop Whoop!