Betty's Garage Grounding Wires

Thread Tools
 
Search this Thread
 
Old Aug 18, 2011 | 09:14 AM
  #481  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by Alkatraz
Black Betty,

Have you made any of these kits up for JDM G37's, ie. Nissan 370GT?

I have just imported mine into Australia and have only read good things about your wires on here. I especially love the stock look, everything that I have seen out of Japan is either bright blue or bright red.

The only issue I might have is that everything is backwards under the hood of my car, eg. the battery is in the right hand side compartment under the bonnet. Obviously this could affect the length of wire required and I am also unsure of any other potential issues.

I was going to simply make up my own wires, but am SERIOUSLY short of free time and with the $AUD being so strong, it will be easier to buy something pre made.

Thanks in advance.

Al
Originally Posted by kool_yaar
these wires should be fine, the length and everything should be the same just installed the other way imo but black betty can confirm this.
I believe kool_yaar is correct. I have had a couple of customers with RHD vehicles purchase them and received no complaints. So I presumed they fit.
Old Aug 18, 2011 | 09:19 AM
  #482  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by Gina
Hey guys, I have a question. So there are many different ways to ground the wires? The grounding from Stillen kit is different from black betty.
Yes. There are various options for grounding locations that will work. I've never seen Stillen's set but they've been selling grounding wires for many years longer than I have. Mine are bigger, look better, and are less expensive though.
Old Aug 24, 2011 | 03:59 PM
  #483  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Shipping to 5 countries on 3 different continents today. I think that is a first for me. If you recently placed an order from Africa, North America, or Europe, yours is on the way today.

Order yours.
Old Aug 29, 2011 | 10:09 AM
  #484  
Alkatraz's Avatar
Alkatraz
Registered User
 
Joined: Aug 2011
Posts: 191
Likes: 21
Hey Betty,

I sent an email to your website last week but didnt get a response. Can you give me a quote with shipping to Perth, Western Australia? Also can you let me know how long the shipping would normally be to Western Australia, I move house in about 3 weeks so need to decide where to have them shipped to.

Cheers Buddy
Old Aug 29, 2011 | 03:00 PM
  #485  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by Alkatraz
Hey Betty,

I sent an email to your website last week but didnt get a response. Can you give me a quote with shipping to Perth, Western Australia? Also can you let me know how long the shipping would normally be to Western Australia, I move house in about 3 weeks so need to decide where to have them shipped to.

Cheers Buddy
I'm very sorry, I got your email and thought I'd sent a reply but must have forgotten. I'm sending you a PM and an email to make sure you get a response. My bad for dropping the ball in getting back to you.
Old Oct 13, 2011 | 02:17 AM
  #486  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
I'm getting lots of orders from every corner of North America lately. Winnipeg to Hawaii to South Florida. Thanks guys for your continued business and support.
Old Oct 13, 2011 | 12:59 PM
  #487  
Alkatraz's Avatar
Alkatraz
Registered User
 
Joined: Aug 2011
Posts: 191
Likes: 21
Can you get the Grounding Wires to Sugarland by next week?

Jeremy,

As you know, I was planning to order a set and have them shipped to Australia but am actually in Sugarland Texas until next friday. Obviously it will save me some postage if you are able to get a set to me by next week, do you think that this will be possible? If you do, send me a PM or email and I will give you the shipping address here and get the money to you ASAP.

Cheers

Al
Old Oct 13, 2011 | 02:43 PM
  #488  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Originally Posted by Alkatraz
Jeremy,

As you know, I was planning to order a set and have them shipped to Australia but am actually in Sugarland Texas until next friday. Obviously it will save me some postage if you are able to get a set to me by next week, do you think that this will be possible? If you do, send me a PM or email and I will give you the shipping address here and get the money to you ASAP.

Cheers

Al
I replied to your email but I don't know which response you'll see first so I'll post here too. Heck yes I can get them to you before next Friday without question. Send payment to bettysgarage@earthlink.net. Unfortunately I must charge state sales tax becasue they are shipping to Texas, but it's still a heck of a lot cheaper than shipping them to OZ. Total is $102.26. On the note with the payment be sure to let me know what color you want.
Old Oct 23, 2011 | 10:27 AM
  #489  
joebeast's Avatar
joebeast
Registered User
iTrader: (2)
 
Joined: Aug 2010
Posts: 274
Likes: 0
Hey jeremy, i just received your wires last night and installed it ASAP. Great packaging and craftsmanship. The installation process was easy until the end where I was suppose to connect the 8 awg cables to the TB and then the 4awg joining end to the battery. The joining part of two 8awg to 4awg was tough to reach to the battery, it was short. Anybody have this problem? Also, the longest single wire that connect from the negative terminal to the bolt on the strut tower in the first step was longer than necessary, any reason for this? Thanks.
Old Nov 7, 2011 | 02:51 PM
  #490  
Dburn's Avatar
Dburn
Registered User
iTrader: (1)
 
Joined: Nov 2011
Posts: 17
Likes: 0
From: Greenville, NC
Just got these as the first of many projects for my car. Thanks for a great product and quick delivery!
Old Mar 30, 2012 | 04:53 PM
  #491  
AvosG37's Avatar
AvosG37
Registered User
iTrader: (4)
 
Joined: Dec 2008
Posts: 2,450
Likes: 0
From: Burbank
PM me price 4 AWG set yellow for 2012 G37S to 91504! thanks
Old Mar 30, 2012 | 04:55 PM
  #492  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
I am no longer making or selling grounding wires. Sorry.
Old Apr 7, 2012 | 03:07 AM
  #493  
NeverBoneStock's Avatar
NeverBoneStock
Premier Member
iTrader: (25)
 
Joined: May 2008
Posts: 3,179
Likes: 69
From: Vancouver, WA
Originally Posted by Black Betty
I am no longer making or selling grounding wires. Sorry.
How come u don't make or sell anymore ????
Old Apr 7, 2012 | 03:51 AM
  #494  
AvosG37's Avatar
AvosG37
Registered User
iTrader: (4)
 
Joined: Dec 2008
Posts: 2,450
Likes: 0
From: Burbank
yyyyy
Old Apr 7, 2012 | 07:19 AM
  #495  
Black Betty's Avatar
Black Betty
Thread Starter
Lexus Defector
iTrader: (60)
 
Joined: Sep 2007
Posts: 21,148
Likes: 2,093
Because I went back to a regular job in my profession that pays a lot more. I don't have time to make wires. And there's not as much demand as there once was so its not profitable for me any longer.



All times are GMT -4. The time now is 04:50 AM.