New Dyno Sheet & Video
Thread Starter
Registered User
Joined: Mar 2008
Posts: 970
Likes: 40
From: Kuwait
New Dyno Sheet & Video
Previous Dyno Run
Mods: Stillen CBE and Injen CAI, No TUNE
Numbers: 252.7whp
New Dyno Run
Mods: Stillen CBE, Injen CAI and Invidia HFC, No TUNE
Numbers: 259.7whp
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/_E0g6-3KAHc&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/_E0g6-3KAHc&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
So I gained 7whp from the Invidia HFC and thats after adding an exhaust and CAI. Not bad!
As you can see my AFR's are absolute crap. Way too lean. In fact, my friend who has similar mods with a slightly better AFR is experiencing knock at high RPM (timing keeps getting retarded on the data log) and that's with 93oct fuel
Anyhow, I'm hoping I can get Sam@GTM to e-tune it for me. I'll will keep this thread updated with a before and after dyno run for the tune.
Mods: Stillen CBE and Injen CAI, No TUNE
Numbers: 252.7whp
New Dyno Run
Mods: Stillen CBE, Injen CAI and Invidia HFC, No TUNE
Numbers: 259.7whp
<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/_E0g6-3KAHc&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/_E0g6-3KAHc&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425" height="344"></embed></object>
So I gained 7whp from the Invidia HFC and thats after adding an exhaust and CAI. Not bad!
As you can see my AFR's are absolute crap. Way too lean. In fact, my friend who has similar mods with a slightly better AFR is experiencing knock at high RPM (timing keeps getting retarded on the data log) and that's with 93oct fuel
Anyhow, I'm hoping I can get Sam@GTM to e-tune it for me. I'll will keep this thread updated with a before and after dyno run for the tune.
Last edited by Q8y_drifter; Apr 4, 2010 at 12:07 PM.
Thread Starter
Registered User
Joined: Mar 2008
Posts: 970
Likes: 40
From: Kuwait
I don't physically send my ECU anywhere actually. First I email the ECU file to GTM, they crack it and send it back to me. Then I data log using the Uprev cipher and send the logs to GTM, they tune it using the Uprev software and send me the tuned ECU files. I upload the files and that's it.
Last edited by Q8y_drifter; Apr 4, 2010 at 08:23 AM.
I don't physically send my ECU anywhere actually. First I email the ECU file to GTM, they crack it and send it back to me. Then I data log using the Uprev cipher and send the logs to GTM, they tune it using the Uprev software and send me the tuned ECU files. I uplaod the files and that's it.
We'd be screwed without the internet huh? The flip side is we'd all probably have a lot more coin still in our pockets.
Can't wait to see the follow up dyno after you get some fuel added drifter, I think you have some signifigant gains to be had.
Sounds awesome!!
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
