Good afternoon,

I need to replace my intake filters for my Z1 intake but it's been a real task in doing so. I've done some research and can't find anything besides the ones that come with the kit. Did a search here on the forums and found some from AEM but they're sold out. My next step was to search based off of the diagram Z1 post on their website in regards to sizing of the stock filters. Still couldn't find anything.


If anyone has any insight on what I should actually be looking for or if they have any recommendations please let me know. Also a dust/water cover would be ideal.
​​​​​​
Thanks.

 

Just went through this with a set of used Z1 intakes I bought. The Z1 filters are lightly oiled which I wasn’t a fan of, plus at $70 something shipped per filter that wasn’t happening. The AEM dry flows that come on the Stillens looked good to me but were either hard to get or pricier than I wanted so I went with one size down from those.

Bought these AEM dry flow filters:
https://www.ebay.com/itm/114153936811

And these filter wraps:
Spectre Performance 8131DK Air Filter Wrap, 1 Pack
Probably won’t have everything installed for a week or two but I don’t foresee any significant issues arising.

 

I have a set of Apexi Power Intake filters i can sell you. I'll check the inner diameter tonight.

 

Came across this from AFE. https://afepower.com/afe-power-24-25...-5r-air-filter
Looks to be exact dimensions as Z1 so pretty hopeful for it. Now to find proper water proof covers.

 

I have an update in regards to this here on my build thread. Reply #57
https://www.myg37.com/forums/build-t...ml#post4296186

 

I have a question on these intakes. When you need to change the filters do you have to take the front end apart like when installing? Or can you sneak them out without taking much apart?