hello fellas,
I have 09 sedan and got Invidia HFC and Catback. I need to replace my 3 bolt and 2 bolt Gaskets that are attached to HFC. can anyone direct me where to get these Gaskets? i've tried to do a search but couldnt find anything...
your help is much appreciated...

 

berks sells graphite gaskets, or you can always make your own with some gasket paper and high heat silicone if you cannot wait on them. You can purchase gasket paper from your local auto parts store.

 

we have a exhaust shop here that will make exhaust gaskets. thats not the problem i have, its the 3 bolt gaskets. he recommended that i buy oem gaskets for hfc, because it uses different material for high heat. and the oem is the best. i went to the dealer and they dont sell it separately. they only sell the 2 bolt gaskets...

 

Z1 Metal HR/VHR Manifold 3 Bolt Gasket

Z1 sells the 3 bolt gaskets.

 

thanks bro..i'm assuming that this will fit with my invidia hfc of 60mm/2.5"?

thanks,
mohamed

 

Fast Intentions sells them on their site...

Fast Intentions

 

thanks man...but they dont have the ride size. they only have 2.5" which is bigger than what i need. im looking for 2.36"

thanks anyways for your help...

 

i'd say the oem gaskets will NOT work with aftermarket HFC

 

Man u got it all wrong! it doesn't matter what diameter your pipes are.. it's all about the flanges.. Berk's 3 bolts HR style gaskets will work with your invidia HFC , Z1 HR style 3 bolts gaskets will work too .. Fastintentions 3 bolts HR style gaskets are good enough ( ( but ones on the posted link above won't work cuz these are made for DE engines).

So whether u are with "2.5 or "2.2 or even "1.7 pipes .. these 3 bolts HR style gaskets will work just fine as long as you drive an HR engine ( 07+ models ).

Being said, there are no OEM 3 bolts gaskests cuz nissan uses an O ring style when bolts their catalyzers on the Headers/Manifolds.. Thats why u didn't find em with dealer.

Go for Berk's, but make sure to pick up the HR style ones, cuz they made these for DE engines too.
hope this help ..

Ahmed, Oman.

 

Thanks Ahmed. I already got my gaskets from Z1. now its just a matter of finding the time to go to the shop and installing it.

thanks everyone for all your input and advise...

stay cool...

 

^ no problem .. all the best.

 

I know old thread bump, but this helped me find the gaskets i needed.

Thanks Shivers