i m rebuilting a 2010 G37 X coupe , the car is back from the frame master and the air bag light is flashing ! maybe cause i ve disconected the AB senssor behind the radiator ? every senssor are connected but still have my Air Bag light flashing ?? Need help !

 

Replace the airbag.

 

are you sure ? the air bag was ok before the frame master , why should i replace it ?

 

You dont need to replace the air bag. When any airbag component is disconnected and the car is turned on, the SRS unit will log an error and trigger the light. You will need to reset the SRS unit.

To clear the code:

1. Turn ignition switch from off to on.
2. Air bag warning lamp is on for 7 seconds and turns off, then turn ignition switch off within 1 second after the lamp turns off.
3. After ignition switch is turned off, wait for more than 3 seconds.
4. Repeat steps 1 to 3 twice. (perform 3 times in total)
5. Turn ignition switch on. (Now in diagnosis mode)
6. Turn ignition off to clear codes.

 

it works perfectly !!!!! thanks a lot Modme !!!

 

Is your car equipped with Intelligent Cruise Control (ICC)?

 

Yes it is .

why ?

 

Thank you for this post.
Just saved me a 2nd trip to the dealer.

 

You got it.

 

This should be stickied on how to reset airbag light

 

Modme, thanks again.
You diagnosed what the consult 3, couldnt even find.
Fail for the service writer.
Should be interesting when i cancel service appointment.
It should be also listed as "things the dealer has no clue how to fix"

 

Hmmm... I need to try this.

 

will it work for g37 09 sedan

 

thanks!!!!!!