Power to Seat/Mirrors not working
Registered Member
Joined: Dec 2013
Posts: 458
Likes: 83
It's kind of complicated. Here's a link to the FSM describing the "Automatic Drive Positioner" system:
https://www.nicoclub.com/service-man...2012%2FADP.pdf
(Below the viewing window on that page you can "Click here to download a copy" of the pdf)
As you'll see there are 2 black boxes involved with seat and mirror memory; a "Driver Seat Control Unit" and an "Automatic Drive Positioner Control Unit". The BCM also has a hand in it, presumably identifying which key is connected to which drive position. Be aware that in addition to fuse #10 there is also a circuit breaker somewhere in the power line. Not sure where that is located and if it can be reset but it would be nice if that was your problem. That book is not an easy read but it gives you all the info you'd need to check the system. Good luck.
https://www.nicoclub.com/service-man...2012%2FADP.pdf
(Below the viewing window on that page you can "Click here to download a copy" of the pdf)
As you'll see there are 2 black boxes involved with seat and mirror memory; a "Driver Seat Control Unit" and an "Automatic Drive Positioner Control Unit". The BCM also has a hand in it, presumably identifying which key is connected to which drive position. Be aware that in addition to fuse #10 there is also a circuit breaker somewhere in the power line. Not sure where that is located and if it can be reset but it would be nice if that was your problem. That book is not an easy read but it gives you all the info you'd need to check the system. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
Джон
General Tech Questions
0
Jun 15, 2019 03:57 PM