G37 Sedan

Question need your input!

Old Jan 22, 2014 | 06:08 PM
  #16  
destro6MTsedan's Avatar
destro6MTsedan
Registered User
 
Joined: Aug 2013
Posts: 140
Likes: 23
From: So. FL
Originally Posted by ChinkyChoy
i wanted to go down in width because i noticed some tire damage on the inside of my front tires i m not exactly sure where its from but it looks like it might have to do with when i turn its rubbing on something.

thanks for the reply yeah i want to go a little more aggressive then what i have now. i ll probably go with some less tire and more camber

here are some side shots

https://scontent-a-dfw.xx.fbcdn.net/...65424382_n.jpg
4mm further than this set up will be very aggressive. Depending how low you decide to go the car will camber in enough for you to tuck, but a stretched tire will for sure be in order. If you drop just a tad more than where you are now, you will for sure have to use camber arms to add more camber. I'm running 20x10.5 E25 in the front with 255/30's and I'm an inch higher than Natalie's ride height and I rub occasionally on the outside part of the tire. Not a big deal to me. Lowerd lifestyle, lol. Hope that helps. 19x9 E25 will look wicked slammed. Can't wait to see the finished product.
Reply
Old Jan 22, 2014 | 06:24 PM
  #17  
ttv36's Avatar
ttv36
Race, repair, repeat.
iTrader: (1)
 
Joined: Apr 2013
Posts: 1,323
Likes: 432
From: Houston
Here is my car when I tried to run standard size tires. The front fit pretty good 245/40/19x9 +25 and -1.5 camber rubbing the outside of the fenders on inclines when turning the wheel all the way (probably wouldn't be an issue if your set higher). The rear rubbed like hail even at -4 camber 275/35/19x10 +25. I ended up moving the 245/40 to the rear and getting 225/45 for the front.

Reply
Old Jan 22, 2014 | 06:29 PM
  #18  
ChinkyChoy's Avatar
ChinkyChoy
Thread Starter
Premier Member
iTrader: (2)
 
Joined: Feb 2011
Posts: 1,403
Likes: 216
awesome thank you both so much!

definitely helped
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
redlinernyc
Engine, Drivetrain & Forced-Induction
10
Feb 29, 2016 11:06 PM
beng37s
Intake and Exhaust
3
Sep 19, 2015 01:32 PM
nomorecivicsi
Brakes, Suspension, Wheels & Tires
3
Sep 10, 2015 03:58 PM
joshferbs
Body Interior Exterior Lighting
0
Sep 9, 2015 08:53 PM
Peepz
Brakes & Suspension
8
Sep 9, 2015 06:51 PM


Thread Tools
Search this Thread

All times are GMT -4. The time now is 07:56 AM.