When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks man! I really appreciate it. After I install my front lip I'll see if I wanna get one of these lips added on. I'll definitely let you know tho thanks again
Originally Posted by GNTLMN_Z
This is the Access Evolution lip from Japan. Carbon Signal out of Dubai make a replica of this.
This is the Successful Automotive lip. If you're interested, let me know and I'll get you in contact with Mark who could hook you up with it.
My largely stock 09 sedan. I'm looking for a decent set of coupe wheels and will hopefully add some springs in the near future.
Also does anyone know where to get the front lip for the non-sport 09? Preferably not eBay.
Last edited by sharphawk; May 17, 2016 at 06:54 PM.
Sweet pics! How did you get the etching done on your turn signal lens? I replaced my HID lens with an etched STI-R lens, but I wasn't sure which aftermarket glass lens fit where our plastic lens is over the turn signal.
Sweet pics! How did you get the etching done on your turn signal lens? I replaced my HID lens with an etched STI-R lens, but I wasn't sure which aftermarket glass lens fit where our plastic lens is over the turn signal.
This is my first post here on the forum. I got this car about 3 months ago and I take pictures of cars, so thought I would document the car as I mod it over time. It's been a pleasant switch from German cars and I might be hooked . It's a pleasure going through pictures of some beautiful mod cars
Originally Posted by 09BlkObsSdn
Those are some really fine pictures of your cars here gents. Ratul, what was your camera setup for the night shot where it looks like the moon is lighting the roof? By the way, welcome to the forum
I love your headlights @Drive Clean! Very, very nice and very trick and custom looking. Those definitely are attention grabbers
Thank you twin _snails! I can't take credit for the whole project, I had Oneighty Custom do all the paint and halo install a few years ago. I just decided to do the lens swap and demon eyes and I'm happy with the way it turned out I really wanted to do the dual etches lens, but I couldn't find any information on which replacement lens fit over the plastic turn signal lens.
Thank you twin _snails! I can't take credit for the whole project, I had Oneighty Custom do all the paint and halo install a few years ago. I just decided to do the lens swap and demon eyes and I'm happy with the way it turned out I really wanted to do the dual etches lens, but I couldn't find any information on which replacement lens fit over the plastic turn signal lens.
Agree w/ Twin, those lights (along w/ PhoQs) look incredible. Who does the actual etching of those lenses, and I assume they have several designs to choose from?
Agree w/ Twin, those lights (along w/ PhoQs) look incredible. Who does the actual etching of those lenses, and I assume they have several designs to choose from?
Thanks newt I had the etching done from The Retrofit Source when I bought the lens from them. The etching costs more than the lens itself but it does stand out a little. I believe you can send them any picture/design and they can etch it on for you.
Agree w/ Twin, those lights (along w/ PhoQs) look incredible. Who does the actual etching of those lenses, and I assume they have several designs to choose from?
Thanks, TRS does all the etching. Pretty much and design that you can come up with or send them they can etch it onto the lens. Not sure if we can link their site on there but it is on there.
Originally Posted by Drive Clean
Thanks newt I had the etching done from The Retrofit Source when I bought the lens from them. The etching costs more than the lens itself but it does stand out a little. I believe you can send them any picture/design and they can etch it on for you.
That's right, they do cost more than the lens itself. My headlight build is in my build thread. I believe I used TSX-R lens on both spots. Ended up costing $120 per pair for my etching.
Sweet pics! How did you get the etching done on your turn signal lens? I replaced my HID lens with an etched STI-R lens, but I wasn't sure which aftermarket glass lens fit where our plastic lens is over the turn signal.
For the turn signal area, its not a direct replacement. You have to do some modding to get it to fit. I even went 1 step further and got another g37 projector and took off the lens holder and put that into the turn signal area to secure it in place. I have 2 pairs of TSX-R clear lens on my lights.
. It's a pleasure going through pictures of some beautiful mod cars 
