When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Finally got my coilovers, wheels, and camber kits installed. Terrible pic for now. Still have to adjust the height and get an alignment, car is way to low. Once that's all finished I will try to take some better pictures.
Finally got my coilovers, wheels, and camber kits installed. Terrible pic for now. Still have to adjust the height and get an alignment, car is way to low. Once that's all finished I will try to take some better pictures.
Hope you were able to get home all slammed
Nice look though
What coils did you get?
Since I have the X model I went with the KSports after hearing about the noise issues some BC's have. The drive home was taken very slow to say the least. Will be playing with the height the next couple of days.
Since I have the X model I went with the KSports after hearing about the noise issues some BC's have. The drive home was taken very slow to say the least. Will be playing with the height the next couple of days.
Once you get some time on them please post a review in the Review folder, we need more feedback on the KSports as they seem like a viable option, thanks! Reviews Only - MyG37
This is perfect and exactly what I was looking for! I'm currently running 8" +48 O.Z. Ultraleggera's on my '07x and while this setup was fine at stock ride height, after lowering the car with Swifts the front wheels are VERY tucked into the fenders. Given your 8.5" +29 specs, a 20mm spacer would give me a 8" +28 setup, which would sit on the car virtually the same as yours with the only trade off being 7mm less backspacing. In the rear, I'm planning to run 15mm spacers giving me an 8" +33 setup sitting, again, almost identically to yours.
This is perfect and exactly what I was looking for! I'm currently running 8" +48 O.Z. Ultraleggera's on my '07x and while this setup was fine at stock ride height, after lowering the car with Swifts the front wheels are VERY tucked into the fenders. Given your 8.5" +29 specs, a 20mm spacer would give me a 8" +28 setup, which would sit on the car virtually the same as yours with the only trade off being 7mm less backspacing. In the rear, I'm planning to run 15mm spacers giving me an 8" +33 setup sitting, again, almost identically to yours.
Thank you, again, for sharing! Much appreciated!
Phil
I think you've got it wrong. I had 19x8.5 +29 with a 15mm spacer which is 19x8.5 + 14 and would equal to 19x8 +8 (you would need a 40mm spacer to get the same specs). Likewise 19x9.5 +34 with a 10mm which is 19x9.5 +24 and would equal 19x8 +5 (you would need a 43mm spacer)
I think you've got it wrong. I had 19x8.5 +29 with a 15mm spacer nets 19x8.5 + 14 which would equal to 19x8 +8 (you would need a 40mm spacer to get the same specs). Likewise 19x9.5 +34 with a 10mm spacer nets 19x9.5 +24 which would equal 19x8 +5 (you would need a 43mm spacer)
Ohhhh. I thought 8.5" +29 and 9.5" +34 were the specs *after* installing the spacers with the wheel's original specs being 8.5" +44 and 9.5" +44.
Hope you had iced coffee
