2014 Q60 AWD currently on Swift lowering springs, looking to get proper set up because backend feels a little bouncy (guessing stock struts from higher compression rate on springs).. I am at about -2% camber front and rear on stock 18in wheel so assuming if the coilovers take me lower that will only get worse.

Build list is below, is there anything I am missing? Will I run into any challenges w the true rear coilover?

Any suggestions on light wheels that will clear Akebono breaks appreciated, might be next move after making suspension upgrades. The super flush fitment of stock wheel against big breaks does look nice for now but I thinking I'll just use these for a winter setup.

 

some Enkei RPF1 in 18x9.5 +15 will clear the Akebono and look good on a coupe.