Knocking/Pinging while accelerating
Thread Starter
Registered Member
Joined: May 2018
Posts: 8
Likes: 1
From: Raleigh, NC
Knocking/Pinging while accelerating
'10 G37 7AT (VIDEO HERE:
)
I know I've seen this issue come up in the past yet I seen different problem solving results. Fairly confident nothing is loose, spent time today banging things around. Sounds internal. Happens on a cold start and also while revving around 1500 - 2000 RPM regardless of gear position (stationary/moving). Idle sounds normal and good. I'm wondering if maybe due to an oil pressure drop - if it's the valve lifters or possibly timing chain guide.
Suggestions or past experiences on this noise would be greatly appreciated. I can provide more sound/video.
I'm in for two options: A- pay the shop -Tear it up myself . I travel for work so time down for fixing isn't super imperative.
I know I've seen this issue come up in the past yet I seen different problem solving results. Fairly confident nothing is loose, spent time today banging things around. Sounds internal. Happens on a cold start and also while revving around 1500 - 2000 RPM regardless of gear position (stationary/moving). Idle sounds normal and good. I'm wondering if maybe due to an oil pressure drop - if it's the valve lifters or possibly timing chain guide.
Suggestions or past experiences on this noise would be greatly appreciated. I can provide more sound/video.
I'm in for two options: A- pay the shop -Tear it up myself . I travel for work so time down for fixing isn't super imperative.
Moderador
Joined: Jun 2019
Posts: 2,626
Likes: 764
From: South Florida
'10 G37 7AT (VIDEO HERE: https://youtu.be/FDp_uDVykaU)
I know I've seen this issue come up in the past yet I seen different problem solving results. Fairly confident nothing is loose, spent time today banging things around. Sounds internal. Happens on a cold start and also while revving around 1500 - 2000 RPM regardless of gear position (stationary/moving). Idle sounds normal and good. I'm wondering if maybe due to an oil pressure drop - if it's the valve lifters or possibly timing chain guide.
Suggestions or past experiences on this noise would be greatly appreciated. I can provide more sound/video.
I'm in for two options: A- pay the shop -Tear it up myself . I travel for work so time down for fixing isn't super imperative.
I know I've seen this issue come up in the past yet I seen different problem solving results. Fairly confident nothing is loose, spent time today banging things around. Sounds internal. Happens on a cold start and also while revving around 1500 - 2000 RPM regardless of gear position (stationary/moving). Idle sounds normal and good. I'm wondering if maybe due to an oil pressure drop - if it's the valve lifters or possibly timing chain guide.
Suggestions or past experiences on this noise would be greatly appreciated. I can provide more sound/video.
I'm in for two options: A- pay the shop -Tear it up myself . I travel for work so time down for fixing isn't super imperative.
Sounds like a rod or loose catalytic converter cell.
How's your oil (metal?)
Thread
Thread Starter
Forum
Replies
Last Post
deep007
Engine, Drivetrain & Forced-Induction
8
Feb 7, 2013 11:25 PM
unknowndesi
Engine, Drivetrain & Forced-Induction
4
Sep 25, 2012 10:07 PM
