question about 2011 g37 convertable
question about 2011 g37 convertable
Hello
My name is Clay
This is my first time on this board
I have a 2011 g37 convertable with about 42000 miles
this maybe a stupid question but here goes
when I park the car , shut the engine off, open the door and get out, I hear a churp churp sound about evry 30 seconds that seems to last about 5 minutes then quits
I have had my car about year and I dont remember it doing that
Is that normal? what could it be
I called infinity and they said the convertable top probably wasnt closed all the way, so I closed the top again and it still makes that noise
Any ideas?
Thanks in advance
My name is Clay
This is my first time on this board
I have a 2011 g37 convertable with about 42000 miles
this maybe a stupid question but here goes
when I park the car , shut the engine off, open the door and get out, I hear a churp churp sound about evry 30 seconds that seems to last about 5 minutes then quits
I have had my car about year and I dont remember it doing that
Is that normal? what could it be
I called infinity and they said the convertable top probably wasnt closed all the way, so I closed the top again and it still makes that noise
Any ideas?
Thanks in advance
Mine has done the same beeping for the top, so if a full up down cycle does not stop the beeping, the other possibility is a window reset. I had to do this as well after disconnecting the battery. Heres the steps:
1. Push the ignition switch to the ON position.--- 2. Close the door.--- 3. Open the window completely by operating the power window switch.-- 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.--- 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. --- 6. Perform steps 2 through 5 above for other windows.
Hope this helps!
1. Push the ignition switch to the ON position.--- 2. Close the door.--- 3. Open the window completely by operating the power window switch.-- 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.--- 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. --- 6. Perform steps 2 through 5 above for other windows.
Hope this helps!
Now the other process that can trigger the beeping is that you turn off the car before you put it in park-my wifes Santa Fa does this not sure why. I don't know if our verts do this though.
Update: tried it yesterday and it only beeped twice and a dashboard warning light came saying put it Park. Tried my wife's Mommy Chariot and it just beeped until I restarted the SUV!
Last edited by Autocutter; Jun 7, 2016 at 09:51 AM.
Thread
Thread Starter
Forum
Replies
Last Post



