Engine, Drivetrain & Forced-Induction
Have Technical Questions or Done Modifications to the G37? Find out the answer in here!

High Mile boost?

Thread Tools
 
Search this Thread
 
Old Sep 25, 2018 | 08:14 PM
  #1  
jaredlindow's Avatar
jaredlindow
Thread Starter
Registered User
 
Joined: Sep 2018
Posts: 3
Likes: 0
From: Wixom, Michigan
High Mile boost?

I have a g37s and I have about 105k miles on my engine and i’ve been thinking about getting the stillen supercharger kit and my car would probably be at 120k miles by the time I get the kit would my engine blow up? Is 120k miles to high for the kit? what would I have to do to my engine so it would be fine with the boost?
Reply
Old Sep 26, 2018 | 01:41 AM
  #2  
slartibartfast's Avatar
slartibartfast
Super Moderator
10 Year Member
Liked
Loved
Community Favorite
iTrader: (7)
 
Joined: Oct 2014
Posts: 6,105
Likes: 842
From: Houston, Tx
I would send an oil sample from two oil changes to Blackstone Labs before adding forced induction. If it comes back with high steel and/or aluminum, that indicates a lot of wear on the crank and rings, or cylinders respectively. If that's the case, back away from forced induction as your engine is worn. If not, go to town and get a good tune.
Reply
Old Sep 26, 2018 | 06:14 AM
  #3  
Surfnazi's Avatar
Surfnazi
Registered Member
 
Joined: Nov 2013
Posts: 2,109
Likes: 176
Forged internals, check heads, and lower block. I would personally strip it down during inspection clean it all and rebuild it with forged internals and new crank.
Reply
Old Oct 1, 2018 | 12:57 PM
  #4  
RickyBobby's Avatar
RickyBobby
Registered Member
 
Joined: Nov 2015
Posts: 127
Likes: 13
From: CO
Oil analysis and compression test, if all checks out do it
Reply
Old Oct 1, 2018 | 01:23 PM
  #5  
jaredlindow's Avatar
jaredlindow
Thread Starter
Registered User
 
Joined: Sep 2018
Posts: 3
Likes: 0
From: Wixom, Michigan
Thanks for the suggestions guys 👌🏽
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
PongSanity
Private Classifieds
13
May 23, 2016 01:52 AM
PongSanity
ECU Tuning / Dyno Data
12
Mar 2, 2016 08:52 AM
JerseyG37s
Engine, Drivetrain & Forced-Induction
35
Mar 3, 2014 05:19 PM
949
Private Classifieds
1
Nov 7, 2012 01:01 PM




All times are GMT -4. The time now is 07:34 AM.